600 Modifications This section is specifically for questions and advice pertaining to mods of the current 600 models.

TURBO

Old Sep 8, 2006 | 01:02 AM
  #61  
KameleonF4i's Avatar
Member
Joined: Sep 2006
Posts: 42
Likes: 0
Default RE: TURBO

i emailed them a couple weeks ago and they said they can/will make a front mount for the F4i and itll produce 140whp at i think 5 lbs of boost.
 
Reply
Old Sep 8, 2006 | 12:57 PM
  #62  
turbof4i's Avatar
Joined: Aug 2006
Posts: 77
Likes: 0
From:
Default RE: TURBO

i would ask them to produce it first, then tell them to show you a dyno chart to prove it. i wouldnt want a company that just slaps a turbo under the tail and calls it a day to work on my bike. im not bad mouthing them but i think a companys products speak for themselves. i dont reccommend building a turbo kit to anyone who is asking about it. i have to agree with blackdog in that if you are aksing how hard it is to do, then it is definately way over your head. if you have experience in turbocharging, the project is about an 8 to complete. there are a lot of components that need modified, moved, or removed for a front mount to work on an f4i. i just dont understand if they COULD produce a front mount kit, why didnt they just do that in the first place? just my thoughts.
 
Reply
Old Sep 11, 2006 | 05:00 PM
  #63  
maxwell139's Avatar
Thread Starter
Joined: May 2006
Posts: 82
Likes: 0
From:
Default RE: TURBO

yes man iv been readin this book i got and its everthing about a turbo and how to install it i just wanted some advice of how hard it was goin to be.. and no i have no experince with installin a turbo but everyone got to start some were!!
 
Reply
Old Sep 11, 2006 | 07:02 PM
  #64  
maxwell139's Avatar
Thread Starter
Joined: May 2006
Posts: 82
Likes: 0
From:
Default RE: TURBO

Also, Could I get a mod to clean this thread of the usless posts? Thanks a lot. To Turbof4i: I'm probably gonna keep it reasonable around 4 or 5lbs and I'd like to have something that spools around 7 or 8g so I can drive the bike normally and have the extra power higher in the rev range. My guess is that a T25 would be a good match. I'm still learning all about it so I'd ask that you could bare with me. Another thing, is there any reason to go with an extrenal wastegate? And I saw that one of the sites above lists a turbo kit and the BOV is optional. Wouldn't you get severe compresser surge without a BOV?
Thanks to those who actually care enough to try and help me out, it's appreciated.
 
Reply
Old Sep 11, 2006 | 07:35 PM
  #65  
turbof4i's Avatar
Joined: Aug 2006
Posts: 77
Likes: 0
From:
Default RE: TURBO

you definately are going to want a BOV. yes you are correct it will definately have compressor surge. i dont reccommend building a kit yourself because it is a pain to fabricate the manifold from scratch. on my bike i had to move the oil filter which needed special fittings, and radiator. before you start ask yourself if you would attempt to turbocharge your daily driver yourself and if the answer is no, then i wouldnt try your bike. if you must turbo your bike yourself at least take it to a professional for dyno tuning. it is VERY important that you dont run your bike without PC tuning. the turbo map is nothing like an n/a map. a t-25 is going to be kind of laggy for a 600. it will spool late and then come on violenty up top. if you can find slightly smaller it would be better for driveability and fitment. trust me there is NO extra room on these bikes after a turbo is on there. you may experience radiator fittment issues. im just getting mine worked out. it is in the stock location but the bottom is closer to the tire and can rub the tire under hard braking because my bike is lowered like 3".
 
Reply
Old Sep 11, 2006 | 07:38 PM
  #66  
turbof4i's Avatar
Joined: Aug 2006
Posts: 77
Likes: 0
From:
Default RE: TURBO

also internal wastegate is the way to go for low boost situations. a lot easier because it comes built into the turbo and you dont have to fabricate something extra that is not needed.
 
Reply
Old Sep 12, 2006 | 12:22 AM
  #67  
maxwell139's Avatar
Thread Starter
Joined: May 2006
Posts: 82
Likes: 0
From:
Default RE: TURBO

so where should i get a kit too then??
 
Reply
Old Sep 12, 2006 | 04:27 AM
  #68  
sk8r20's Avatar
Joined: Jun 2006
Posts: 308
Likes: 0
From:
Default RE: TURBO

ORIGINAL: maxwell139

How hard would it be to install a turbo on my 05 cbr 600rr???
What would i need? How much?

also if there is any webs that i could look at too!!
thanks
Once again alomost every1 answers the question that is not asked, he didnt ask if he should do it, or if it is stupid, or he if should just get a diff bike, He asked 4 questions stated above that alot of ppl must of missed and made up there own questions in there heads, i dunno why ppl do that its stupid just let him do what he wants and try to help him out dont tell him to not do it or its "squidly" behavior its his bike,money and life if he wants to do it, i say do it. Im sry i cant help any just irritates me when ppl decide they cant help u at all so they just post a comment sayin not to do it. i wasnt goin to post cause like i said i have no advice on the subject but cant stand how ppl make up there own questions and answer them and avoid ur question for the most part. So even if he has been ridin for 20yrs and wants to put a turbo on his bike is that "squidly" of him, i think if u guys are worried that he might kill himself because of some extra HP then u might as well tell ppl to not even get a bike, i think that is what i will do next time i see a post on "what bike should i buy" ill tell him/her not to, they could kill themselves on it u could die in ur sleep so u might as well have as much fun as u can while ur here so bla bla bla to all of our dads on here. Now alot of u are kool and have good advice just some ppl dont know how to answer the questions stated but give there own personal opinion on the subject kinda like me but in a diff. manner.some ppl really give good answers but 75% of the posts are useless here like mine. I know someone will have an "INTELLIGENT" comment to this but owell i dont care what u say thats my rant. [sm=bangbang.gif] [sm=rant.gif]

Sry for yet another useless post just wanted to get that off my chest after readin the comments. I say if u can find a way to do it then Do It man. wish i could help.
 
Reply
Old Sep 12, 2006 | 05:27 PM
  #69  
D2VW14_20's Avatar
Senior Member
Joined: Jul 2006
Posts: 5,248
Likes: 0
From: Scottsburg,In/DaytonaBch,Fl
Default RE: TURBO

Amen, thats what I said (#50)
 
Reply
Old Sep 12, 2006 | 05:32 PM
  #70  
sk8r20's Avatar
Joined: Jun 2006
Posts: 308
Likes: 0
From:
Default RE: TURBO


ORIGINAL: D2MEclipseGT_600RR

Amen, thats what I said (#50)
well i must of read right over yours sry bout that, but least theres ppl who agree with me.
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:34 PM.