ok, so heres the deal. i got my first bike a few months ago and as we all do i went crazy with accessories. just bought my undertail from ebay and it looks fine (though there is a small gap that i can fiber fill). but here's my issue. the undertail goes so far up that i have to remove my stock brake light. so i have all these wires hanging and on the undertail there are 2 LED brake lights each with 4 wires comming out of them (1 red, 1 black, 1 white, 1 green) i don't know **** about wiring. and im trying to not only wire my stock brake light wires (which have only 3 wires) and my turn signals (each having 2 wires) into these new lights.....does anyone have a diagram on what the hell exactly i need to do to make this cluster-**** of wires work as not only my brake lights but also as my turn signals???? im clueless so please speak in dummy english. thanks y'all

ride safe

 

ok--so thanks to the help of Turnin20s i figured out what wires represent what on my undertail.....now i need to know what the **** the wires do on my stock wiring harness......there are 3 wires that ran into a plug that hit the stock brake light(s). one is green, one is brown, one is green with yellow tracer. what do these wires mean? which one is the ground, which one is the running light and which is the brake light? any help????

 

i will see if i can get you a diagram tomorrow. i did all the wiring myself....i will see what i can do for you.