I'M Wondering if anybody had this problem or would know wich bearing causes this.When I release the clutch lever you can hear and feel that there is a rough bearing through the whole bike.

 

are you talkin about in neutral? the 929/954 have a "loud" clutch basket if u wanna call it that. does it disappear when u pull the clutch in? if so and the clutch is not slipping then dont worry bout it.....

 

It happens only when I release the clutch.When I pull the clutch lever the sound and rough bearing feel is gone.So As per what you are telling me its normal

 

One Of my friends works at honda and I got to talk to a mecanic,he tried it out and told me excatly what you told me ..he says sometimes there are even worst then mine...

 

so is this normal then? my 954 does the same thing- been that way for a few years. You can hear it while riding but its quiet. I was told it was a input shaft bearing. Sounds like a "throw out bearing" and acts the same as a car would. The sound goes away when the clutch is pulled because there is pressure on the worn bearing and it takes up the tolerance; when released it rattles/grinds and makes a wurring sound. So is this "NORMAL" ? im confused

 

Does ur 954 ride and act the same as it has been for the last few years???? if so then i wouldnt concern myself wit that unless it really affects the bike....mine has been noisy since i bought it in 05. at about 29000 miles and my bike only "broke down" when i ran outta gas.....once. until she doesnt fire up on the first try quickly and doesnt run then ill concern myself wit repair. i just replace the oil and wash it.....