helmet problems
#1
![Default](/forum/images/icons/icon1.gif)
I currently have a cl-14 hjc helmet and noticed that there was air coming in from the bottom of it enough to defog a complety fogged up visor going 30. When i asked hjc about this problem they suggested i buy a chin curtain which is basicly a two pieces of mesh fabric that go under the chin area. This didnt help at all so they suggested that it was my riding position i have tried every riding position i can think of at the moment. Is there anything that i can do short of buying a new helmet?
#2
![Default](/forum/images/icons/icon1.gif)
De-fogging is a good thing but an arctic breeze freezing your eyeballs is not. My solution was to buy a seperate helmet for cold weather -- actually it's a snowmobile helmet. It's the same as a normal bike helmet except: double visor (no fog - slight distortion of light), chin warmy thing and a real breath deflector (not the cheap thing HJC calls a breath deflector). Mine is the g-max 38x -- forget how much it costs but it's reasonable. Only thing I don't like about it is some visibility is compromised for warmth -- had it down to 17F with no probs -- so you really gotta check your blind spot good before changing lanes.
As for the HJC, my other helmet is the hjc symax model and it flows air pretty well also. Don't know if you can fix that.
As for the HJC, my other helmet is the hjc symax model and it flows air pretty well also. Don't know if you can fix that.
#3
![Default](/forum/images/icons/icon1.gif)
Kobester,
I have the CL-14 as well and had issues with the air coming in from the bottom, enough so as to cause the helmet to lift at high speeds. I'd have to go into nearly a full tuck during highway riding just to keep the wind resistance down. I've tried opening all the vents hoping the free flowing air would even out, and I tried closing all the vents to create an air bubble within a bubble [helmet]...no dice. Anyway...purchased a breath guard (helps keep the helmet from getting fogged up), and a chin curtain from the dealership. At a good clip of 70-75, there's still the issue of the helmet bouncing around, but it's not as bad as without the chin curtain. Don't know if it's helmet specific (the CL-14s are good helmets, but definitely on the bulky side...sometimes I feel lik Dark Helmet [SpaceBalls] when I put it on), but I'm guessing you might have to purchase another helmet. Probably why I'm purchasing another one *shrug*
If you figure out the anomaly (riding position, vent combination, etc.), let me know. Good luck!
I have the CL-14 as well and had issues with the air coming in from the bottom, enough so as to cause the helmet to lift at high speeds. I'd have to go into nearly a full tuck during highway riding just to keep the wind resistance down. I've tried opening all the vents hoping the free flowing air would even out, and I tried closing all the vents to create an air bubble within a bubble [helmet]...no dice. Anyway...purchased a breath guard (helps keep the helmet from getting fogged up), and a chin curtain from the dealership. At a good clip of 70-75, there's still the issue of the helmet bouncing around, but it's not as bad as without the chin curtain. Don't know if it's helmet specific (the CL-14s are good helmets, but definitely on the bulky side...sometimes I feel lik Dark Helmet [SpaceBalls] when I put it on), but I'm guessing you might have to purchase another helmet. Probably why I'm purchasing another one *shrug*
If you figure out the anomaly (riding position, vent combination, etc.), let me know. Good luck!
ORIGINAL: kobester
I currently have a cl-14 hjc helmet and noticed that there was air coming in from the bottom of it enough to defog a complety fogged up visor going 30. When i asked hjc about this problem they suggested i buy a chin curtain which is basicly a two pieces of mesh fabric that go under the chin area. This didnt help at all so they suggested that it was my riding position i have tried every riding position i can think of at the moment. Is there anything that i can do short of buying a new helmet?
I currently have a cl-14 hjc helmet and noticed that there was air coming in from the bottom of it enough to defog a complety fogged up visor going 30. When i asked hjc about this problem they suggested i buy a chin curtain which is basicly a two pieces of mesh fabric that go under the chin area. This didnt help at all so they suggested that it was my riding position i have tried every riding position i can think of at the moment. Is there anything that i can do short of buying a new helmet?
#4
![Default](/forum/images/icons/icon1.gif)
ORIGINAL: stephygee
Kobester,
I have the CL-14 as well and had issues with the air coming in from the bottom, enough so as to cause the helmet to lift at high speeds. I'd have to go into nearly a full tuck during highway riding just to keep the wind resistance down.
Kobester,
I have the CL-14 as well and had issues with the air coming in from the bottom, enough so as to cause the helmet to lift at high speeds. I'd have to go into nearly a full tuck during highway riding just to keep the wind resistance down.
and as far as the air flow goes, i like it (when it's over 80). i open all the vents and leave the visor slightly open at the last notch before closed. the cl-14 is a great hot weather helmet because of the air flow but i too am in the market for a new helmet, more because of personal preference and not because of helmet problems.
#5
![Default](/forum/images/icons/icon1.gif)
ORIGINAL: NINE2NINE
[/quote]
The sizing isn't the issue...I wear a medium and a small was just too tight. I don't think I was clear when stating the lift issue...when I'm going over 70, the wind lifts the helmet off my head a bit..not to the point where it would be a hazard as I have it strapped on, but the aerodynamics of the CL-14 doesn't help much. My head/helmet just jumps around a lot and I have to "chin in" to keep the wind from under my helmet. I remember my Shoei(s) fit better and were much lighter, but @ $600 a pop, getting a replacement wasn't feasible at the time. I change my helmets at least every 1.5 to 2 years regardless of wear, and my two previous helmets were Shoei, as was my first helmet. While the CL-14 is a good standard helmet, I definitely noticed the difference when I put it on.
Dark Helmet
#6
![Default](/forum/images/icons/icon1.gif)
ORIGINAL: stephygee
The sizing isn't the issue...I wear a medium and a small was just too tight. I don't think I was clear when stating the lift issue...when I'm going over 70, the wind lifts the helmet off my head a bit..not to the point where it would be a hazard as I have it strapped on, but the aerodynamics of the CL-14 doesn't help much.
Dark Helmet
The sizing isn't the issue...I wear a medium and a small was just too tight. I don't think I was clear when stating the lift issue...when I'm going over 70, the wind lifts the helmet off my head a bit..not to the point where it would be a hazard as I have it strapped on, but the aerodynamics of the CL-14 doesn't help much.
Dark Helmet
and the dark helmet signiture is funny as hell. i love spaceballs.
#8
#10
![Default](/forum/images/icons/icon1.gif)
just got back from a rather destressing ride. Trying to find a position that might work to cut that down with no avail was in a full tuck with air coming in from the bottom at 65!!! Also i noticed that when im going at a higher speed say 80 or so the bottom of the helment starts to creap back on me just from the wind. Deciding to see just how far it would go back i went up to 100-105 on a back road and the bottom of the helmet was touching my chin. I'm thinking this might be a sizing issue but i really dunno ive had this helmet for a long time now and when i bought it i knew next to nothing about riding the dealer that i went to had me try on a med and that was just too small then i tried on the large and found that it was just a tad to big so i tried swiching med pads for the large ones and that really didnt help so i ended up getting the large. I think its time for that new helmet now any good ones that you guys know of?