Life line
#1
Life line
My bikes life since it has been in my hands.
This is the bike after i just got it. On the way home the right side fairings flew off and broke. And so my journey began. lol
http://i661.photobucket.com/albums/u...idal07/003.jpg
http://i661.photobucket.com/albums/u...idal07/009.jpg
The crazy amount of paint layers i had to get through!!!
http://i661.photobucket.com/albums/u...dal07/0022.jpg
Everything has been primed and ready for paint.
http://i661.photobucket.com/albums/u...dal07/0014.jpg
The 95% complete result!
http://i661.photobucket.com/albums/u...idal07/027.jpg
http://i661.photobucket.com/albums/u...idal07/028.jpg
I have a windshield on order along with new bolts for all the fairings. It needs the exhaust to be painted and a rear fender and new mirrors. Then itll be 100%.
Thanks for looking
This is the bike after i just got it. On the way home the right side fairings flew off and broke. And so my journey began. lol
http://i661.photobucket.com/albums/u...idal07/003.jpg
http://i661.photobucket.com/albums/u...idal07/009.jpg
The crazy amount of paint layers i had to get through!!!
http://i661.photobucket.com/albums/u...dal07/0022.jpg
Everything has been primed and ready for paint.
http://i661.photobucket.com/albums/u...dal07/0014.jpg
The 95% complete result!
http://i661.photobucket.com/albums/u...idal07/027.jpg
http://i661.photobucket.com/albums/u...idal07/028.jpg
I have a windshield on order along with new bolts for all the fairings. It needs the exhaust to be painted and a rear fender and new mirrors. Then itll be 100%.
Thanks for looking
#2
Nice work, wish I was good with a spray gun.
Until your new screen arrives you can compound that screen back to looking half decent with stuff they use on air plane perspex, bit of elbow grease involved though.
Depends on how long the new screens going to be.
What sort of graphics (if any) are going with?
Until your new screen arrives you can compound that screen back to looking half decent with stuff they use on air plane perspex, bit of elbow grease involved though.
Depends on how long the new screens going to be.
What sort of graphics (if any) are going with?
#3
#6
Nice work, wish I was good with a spray gun.
Until your new screen arrives you can compound that screen back to looking half decent with stuff they use on air plane perspex, bit of elbow grease involved though.
Depends on how long the new screens going to be.
What sort of graphics (if any) are going with?
Until your new screen arrives you can compound that screen back to looking half decent with stuff they use on air plane perspex, bit of elbow grease involved though.
Depends on how long the new screens going to be.
What sort of graphics (if any) are going with?
As far as the screen it should be here next week so ill wait. lol and the passenger seat i have no idea. Its crazy ugly but will have do do for now. Its so huge that my wife is at like a 45 degree angle. lol
The decals im going with are the ones from ebay. They say like CBR racing and CBR F2. Ill get pics up after i get them.
#7
The blue is the dupli-color auto paint that you get from auto zone or pep boys. It kinda has a metal flake. Really small though. Read the above comment for the seat. lol It just came with the bike. haha
#8
And I'm going with the Dupli-color paint system too. Silver base, metallic or pearlescent clear coat (haven't decided yet).
Your bike means there's hope for mine
#9
And the gun looked familiar too. Kawasaki right? Got mine from Pepboys too. What size compressor did you use with it?
And I'm going with the Dupli-color paint system too. Silver base, metallic or pearlescent clear coat (haven't decided yet).
Your bike means there's hope for mine
And I'm going with the Dupli-color paint system too. Silver base, metallic or pearlescent clear coat (haven't decided yet).
Your bike means there's hope for mine
Make sure when your setting the PSI to have about 30 PSI coming out of the gun once you have pressed the trigger. I messed up at first and set it to about 35 PSI and once i pulled the trigger about 20-25 PSI was coming out so it kinda splatted the paint. Good luck and cant wait to see what you do with it.
OOOOHH before i forget. USE SOME TYPE OF CLEAR THAT IS CHEMICAL(GAS) RESISTENT!!!! I put my tank on last night and the smallest of small drops got on my paint and F'd it up. The dupli color clear is good but use atleast one or two coats of a chemical one.
#10
I was already pre-warned about the PSI at the gun. I stopped by Home Depot and picked up an adjustable pressure regulator for $15. So I can open the compressor wide open and just regulate it at the gun. Your compressor is about the same as mine, cept I got a 5 gallon 4hp.
You're definitely giving me a lot of hope that this will all turn out alright. Any other tips you have I'd really appreciate. I'd have missed the chemical clear.
You're definitely giving me a lot of hope that this will all turn out alright. Any other tips you have I'd really appreciate. I'd have missed the chemical clear.