How to learn to make wheelies
#5
RE: How to learn to make wheelies
go to a big lot, and run your bike at really high RPMs in 1st gear, dont redline it, this will start to pick the front end up, gets you used to the bike coming up, then you can go onto slipping the clutch.
this vid might help:
http://video.google.com/videoplay?do...+wheelie&hl=en
this vid might help:
http://video.google.com/videoplay?do...+wheelie&hl=en
#6
RE: How to learn to make wheelies
there is no real way to tell somebody how to do it over the internet. the easiest way and probably safest but not the most realistic is to get ona wheelie machine. it is a bike that is attached to a machine via a solid axle and all you can do is go up and down. i forget the website about it but im sure somebody will post it for me. other than that just keep trying IN AN EMPTY PARKING LOT AND A FEW FRIENDS SO WHEN YOU DO HURT YOUR SELF ONLY YOU WILL GET HURT AND YOU WILL HAVE OTHER PEOPLE AROUND TO HELP YOU. PRACTICE MAKES PERFECT
#7
RE: How to learn to make wheelies
ORIGINAL: hondadriver4life
there is no real way to tell somebody how to do it over the internet. the easiest way and probably safest but not the most realistic is to get ona wheelie machine. it is a bike that is attached to a machine via a solid axle and all you can do is go up and down. i forget the website about it but im sure somebody will post it for me. other than that just keep trying IN AN EMPTY PARKING LOT AND A FEW FRIENDS SO WHEN YOU DO HURT YOUR SELF ONLY YOU WILL GET HURT AND YOU WILL HAVE OTHER PEOPLE AROUND TO HELP YOU. PRACTICE MAKES PERFECT
there is no real way to tell somebody how to do it over the internet. the easiest way and probably safest but not the most realistic is to get ona wheelie machine. it is a bike that is attached to a machine via a solid axle and all you can do is go up and down. i forget the website about it but im sure somebody will post it for me. other than that just keep trying IN AN EMPTY PARKING LOT AND A FEW FRIENDS SO WHEN YOU DO HURT YOUR SELF ONLY YOU WILL GET HURT AND YOU WILL HAVE OTHER PEOPLE AROUND TO HELP YOU. PRACTICE MAKES PERFECT
petje: just remember to use the rear brake.
#8
RE: How to learn to make wheelies
ORIGINAL: petje
And don't crash youtr bike. How to do it?
And don't crash youtr bike. How to do it?
I put a nice post in the How to section on "how to do an accidental wheelie" it's a great topic.
Mike
Just a question by "slip the clutch" does that mean dump it or slowly let it out from the friction zone?
#9
RE: How to learn to make wheelies
when you slip the clutch it should be really smooth... not pull it in, rev, then let it out... you should already be on the roll when you just "rub" the clutch in a bit and right back out..... you just pull it in enough that it will gain revs, not disengaging it
#10
RE: How to learn to make wheelies
ORIGINAL: BlindLOKI
when you slip the clutch it should be really smooth... not pull it in, rev, then let it out... you should already be on the roll when you just "rub" the clutch in a bit and right back out..... you just pull it in enough that it will gain revs, not disengaging it
when you slip the clutch it should be really smooth... not pull it in, rev, then let it out... you should already be on the roll when you just "rub" the clutch in a bit and right back out..... you just pull it in enough that it will gain revs, not disengaging it