Clear Alternatives Tail Light Wiring?
#1
#2
RE: Clear Alternatives Tail Light Wiring?
I installed my smoked clear alternative earlier this year. It was easy just time consuming. The factory harness plugs in then you have four wires
for the left/right +/- blinkers. If you go to the clear alternatives web site it has the color coding for the wires. Start with taking off your seat and rear
end. You will need a set of metric allen/hex wrenches. Here is a pic of the wiring harness.
for the left/right +/- blinkers. If you go to the clear alternatives web site it has the color coding for the wires. Start with taking off your seat and rear
end. You will need a set of metric allen/hex wrenches. Here is a pic of the wiring harness.
#4
RE: Clear Alternatives Tail Light Wiring?
I just installed it on my 06 f4i two nights ago, and the harnesses didn't match up so ended up having to hard wire everything.....the wiring diagram from Clear Alternatives didn't match up with the bike, so more time was spent than really should have, had we just used our heads.
Are the harnesses matching up to your bike???
Are the harnesses matching up to your bike???
#5
#6
RE: Clear Alternatives Tail Light Wiring?
I didn't use any resistors either...and everything is working correctly.....I have the wiring written down correctly at home and will get it when I get there this evening at work now and it was 2 in the morning when I finally got done so memory was a little blurry.....
#8
#10
RE: Clear Alternatives Tail Light Wiring?
quick question for you guys who have this and have it installed.
Are the turns signals back feeding and leaving your cluster turn signal lights on but not flashing (only flashes when you turn)?
My undertail has this problem and i need 8 diodes for all the wires, its so cheap and funky that i'm going to give it up completely and go with pimpbike/ca.
Now all i have to do is match up the wires for the brakes/running light/ground...now what about the turn signals is it one wire for each side or is it turn signal + and ground for each side?
Thanks for the help
Are the turns signals back feeding and leaving your cluster turn signal lights on but not flashing (only flashes when you turn)?
My undertail has this problem and i need 8 diodes for all the wires, its so cheap and funky that i'm going to give it up completely and go with pimpbike/ca.
Now all i have to do is match up the wires for the brakes/running light/ground...now what about the turn signals is it one wire for each side or is it turn signal + and ground for each side?
Thanks for the help