Replacing Stock Brake Lines
#1
![Default](/forum/images/icons/icon1.gif)
I was just about to order some Two Brothers Brake Lines but i figured before i did..is ther eanyone out there can tell me if this is going to be a minor project or a massive undertaking and if the looks is really worth the work..well i already know that answer.Im just tryin to stir the brain trust on what it is goin to entail...thanks..
#2
![Default](/forum/images/icons/icon1.gif)
it really depends on how mechanically inclined you are. just be sure to bleed it properly and you should be ok. i know when i put techn-fit ss lines on my car it took me a couple hours just to make sure i did everything to the T. i still have yet to get braided lines for the bike. speed bleeders help to or a brake flush machine. tools are worth the investment
#4
![Default](/forum/images/icons/icon1.gif)
Its not really so much hard as it is time consuming. Its easy to attatch and run the lines because its only a few banjo bolts. The hard part is bleeding the system after and will also be the most time consuming. As far as what tahoe said about the back I don't see why you would lock up the rear by putting a ss line on it. Why is that tahoe?
#5
#7
![Default](/forum/images/icons/icon1.gif)
ORIGINAL: kustom98f3
Its not really so much hard as it is time consuming. Its easy to attatch and run the lines because its only a few banjo bolts. The hard part is bleeding the system after and will also be the most time consuming. As far as what tahoe said about the back I don't see why you would lock up the rear by putting a ss line on it. Why is that tahoe?
Its not really so much hard as it is time consuming. Its easy to attatch and run the lines because its only a few banjo bolts. The hard part is bleeding the system after and will also be the most time consuming. As far as what tahoe said about the back I don't see why you would lock up the rear by putting a ss line on it. Why is that tahoe?
I'm assuming it's because if the rear brake pedal were any stiffer you'd have a tendency to lock the rear brake, which is bad. The rear brake is pretty damn mushy though, at least it is on my bike. I don't think that I can press it hard enough to lock the rear wheel.
#8
#9
#10