hi everyone,so i decided to paint the seat on my cbr and required taking off the tail on it,i did that and accidentaly got all the wires disconnected,i have 2 wires that i need to hook up coming from the bike,and another 2 coming from the r 6 tail lights i have on this bike..also positive and negative wires that are coming from the licence plate light..i have tried many combos.the lights turn on but when i turn on the turn signals they will not blink and also dont see any brake lights when i press the brakes,this is driving me crazy.my seat is done and everything so i just need to put these wires how they are suppose to go and i dont want to end up taking it to a shop,if anyone knows how i am suppose to wire it i would really appreciate it,would save me time and money.i will put an image to see what i am working with thanksphoto.jpg?t=1291586019

 

try to connect both green and brown wires and connect to the open red wire..

 

Pull everything apart one more time then use a simple grounding tester to identify the
turn signals , then the brake last one left should be the tail light.