How do you rivet a master link?
#1
#4
RE: How do you rivet a master link?
You definitely need a rivet tool. It should have a set of anvils that you drop init and then just press the rivet. Everyone I have ever seen comes with simple instructions, but if you run into issues just post up and I'll see if i can help out. One thing that I would suggest is to make sure that you have the right master link. I tried to help a buddy rivet one and after a little bit of frustation, I realized that the master link wasn't the right one. If the pin seems to short to come through the link it's probably the wrong size.
#5
#8
RE: How do you rivet a master link?
ORIGINAL: elmer
you could just go grab a c-clip master link for a buck or whatever. Thats probably what I would do.
you could just go grab a c-clip master link for a buck or whatever. Thats probably what I would do.
#9
RE: How do you rivet a master link?
If your multi talented and have some good peining hammers you can go to town and try and mold them over yourself. That is what I did with my guad. Took a long time and two guys but it hasn't failed. I would have felt a lot more confident with a rivet tool though.
#10
RE: How do you rivet a master link?
If your old chain is still on the bike ride it down to your local shop and take the old one off. Then ask them if you can borrow the tool and use it in the parking lot or have them do it and get one later. Or see if anyone you know that rides has one you can borrow. Or see if there is a local club that knows someone.