crap
well i was changing my oil and i noticed some really gay. the bolt that holds the exhaust pipe on the bottom of the bike has broke off of the frame. so now basically my exhaust is held by the bolts on the manifold and the tail end. it seems to not be close to touching anything but im not sure if that will be the case after a few wheelies. my question is how do i fix it other than welding. dont feel like paying a **** load to get it fixed. could i some how run a good strap around it and kinda rig it. or just leave it be. man its got me mad.
thx, steve
thx, steve
you might be able to use an easy out. these are pretty cheap at any auto store. ive found its easier if u drill a small hole in the center of the bolt first to give the easy out somthing to grip on. hope it works out bro.
drill the bolt out completly and fit a nut and bolt simple,
if the brackets broken, the only option is to weld it back to the exhaust,
if that is your bike your describing below your thread
on a 2006 warranty should take care of it
if the brackets broken, the only option is to weld it back to the exhaust,
if that is your bike your describing below your thread
on a 2006 warranty should take care of it
okay its not the bolt thats bad its the piece thats was connected to the frame that broke off. well once i tell them i have a after market exhaust on they are gunna say its not our fault.
and sry but i use the work gay for meaning of "oh thats not cool".. not anyother way.
and sry but i use the work gay for meaning of "oh thats not cool".. not anyother way.
Put the stock can back on then, the brackets on the down pipes underneath not on the can,
it's not really rocket science.
Then take it back and claim the warranty.

if it's an 06 model it will be an under seat exhaust won't it??
it's not really rocket science.
Then take it back and claim the warranty.

if it's an 06 model it will be an under seat exhaust won't it??
Thread
Thread Starter
Forum
Replies
Last Post



