Dont know if it means much, but i jumped my bike with a car
Jumpbox before (about 3-4 months ago)and have had no problems...

 

Why not push start you sissies, much easier than unscrewing the seat, finding cables, moving a car, blah blah blah. Run yer bike as fast as you can then hop on,10 sec.

ashsammy wanna make me a set of those bad boys?? (For$$$ of course.)

 

u need to push it at least 20kmph while holding the clutch (i could only do 14 !), or if there's a parking lot ramp around u so u can just roll down, and i would worry about loosing balance and dropping the bike!! so i guess it needs practice if you're a noob like me

set of what? u mean the inside rim stickers? if so then i attached a file 4xHonda.txt, save it to disk and change the ext to .pdf, its a set of 4 honda logos sized to fit into the rim, then look up a print shop near you and send them the file (Kinko's, or any shop that has a vynil dye-cut machine), just tell them u need it dye-cut on reflective sheet whatever colour u like (reflective sheet usually comes in 6 colours only). i wouldn't recommend sticking anything into the front rim, it could affect the balancing and cause headshake. the easiest way to stick'em in the rear rim equally is to refer to the position of the spokes.

 

you dont have to push it that fast, I can start mine in about 8-10 strides (30ft).
Thanks for the link too.