So i havent rly reaserched this yet besides a site a buddy showed me on how to properly break in a motor...which is basically within the first 20 miles is to accelerate in 2nd 3rd and 4th and then decelerate in gear..so that the piston rings would seal properly..i rly have no background on this but if ne1 has any good info or hands on experience with this let me know. thanks

 

Have a look here https://cbrforum.com/m_114643/tm.htm

 

http://www.mototuneusa.com/break_in_secrets.htm hope this helps.