Ok so here is a link to the video of what is going on: 2002 CBR 600 F4i Not running, won't run, throttle problems stalling - YouTube
When the bike stalled the first time, I did not touch the throttle. For all the others I did.

How it happened:
Riding bike all day, roughly 140miles, stopped to get fuel, filled up, put key in, and bam, Doesn’t run. After some research, a lot of people had issues with their BAS (Kinda similar, except my pump always primes) so I bypassed that to see if it made a difference. It did make a difference, now it idles, as seen in the video, really low and only for a short time frame.

I checked all connectors and they are firmly in.
I checked all vacuum lines and anything else I could see
New cam chain tensioner installed about 300miles ago, was running beautifully…
--- I dropped the bike while installing the CCT – that’s why checked the BAS
Rewired some lights: blinkers and rear running lights, now all LED (not brake lights tho)

 

Bad Gas! Fouled the Plugs too. Thanks for the help everyone. ;-)

 

Glad you figured it out. With enough wrench time on these bikes you can pretty much solve any problem.