How about some pics of where you the wires?

 

Right now its raining here, but i did it exactly as you guys said!!! The blue wire to the 3 wires harness on the left side of the battery (to the yellow wire with a red line) the brown wire i put it to the all black with brown points near the battery, am i missing something???!!!

 

Or maybe my problem is the brown wire, i read all the 9 pages again and Kuroshio saids tha the brown wire has to be joined to a black/red wire at the 10p gray connector. I have a doubt cause i think there is no black red wire in the gray connector... I'll check it out...

 

I'll look under my seat tomorrow when I get a chance and find my brown wire

One thing that could be impacting this (and I just half noticed / half remembered): in the F4i shop manual there are 2 wire diagrams. One is for 01-03 and the other is 04-06.

There are way too many wires in the 2 diagrams to figure out the differences. But that they put 2 complete diagrams in there hints that it's more than just a couple different colors. I have an 06 F4i

 

My bike its f4i 2005, you said that the brown wire has to be connected to the black/red wire on the 10p gray connector, where is this connector?? Its the ecm connector???

 

lol dude it's 1 am and I haven't messed with the alarm in a year. Give me a chance to refresh my memory with a peek tomorrow and I'll let ya know . Oh and I eliminated the pink and grey wires. That I do remember.

I keep the alarm fob separate from the key so if someone gets the key, the fob attached to it will only turn on my leds. And then had a bad experience where i set off the alarm while riding one day with the alarm fob in my pocket

 

The mystery brown -> black connection. The black wire I connected to was wrapped in electrical tape from the manufacturer. it crosses the battery from the left side to the right side. I sliced open the tape and spliced into the black wire with solder

 

Ok, I also spliced to a black with brown spots wire, its the same??? there are also 1 or 2 other black wires with different pattern, i'll check all.

Here is what i'm talking about.

 

Well i tried with the other 2 black wires of that harness and NOTHING!!!!!

 

Bump!!!