F4i - Main Forum Main F4i discussion board

sprocket ?

Old Oct 30, 2005 | 05:20 PM
  #1  
stargtsi's Avatar
Thread Starter
Joined: Oct 2005
Posts: 13
Likes: 0
Default sprocket ?

Im a fairly new rider been riding most of this summer on my new 05 600 f4i and would like to get more power out of it... Im definately comfortable with the bike and already had my share of road rash. So im looking for opinions on what i should do as for sprockets beacause im doin exhaust and possibly a power commander setup and would like to know recommendations on sprocket change. I was thinkg of going the whole 520 conversions route with -1 front and 2+ in the back. Any suggestions would be appreciated
 
Reply
Old Oct 30, 2005 | 08:42 PM
  #2  
nyteryder167's Avatar
Joined: Jun 2005
Posts: 20
Likes: 0
Default RE: sprocket ?

I went with the 520 conversion -1 front +2 back and I love it. Powerband comes in a bit lower now and it really pulls. I would recommend it for an intermediate rider.
 
Reply
Old Oct 30, 2005 | 10:17 PM
  #3  
1badf4's Avatar
Joined: Sep 2005
Posts: 73
Likes: 0
Default RE: sprocket ?

I am very happy with the -1/+1
 
Reply
Old Nov 3, 2005 | 02:24 AM
  #4  
ceebear's Avatar
Member
Joined: Nov 2005
Posts: 82
Likes: 0
From: Dumfries, VA
Default RE: sprocket ?

im also looking at -1/+1 for my 02 F4i.....so my question is how dose the -1/+1 pull out of turns at low rpms???
 
Reply
Old Nov 3, 2005 | 01:46 PM
  #5  
1badf4's Avatar
Joined: Sep 2005
Posts: 73
Likes: 0
Default RE: sprocket ?

the bike pulls fine out of turns, but that is a tough question to answer. It all depends on the turn and your rpm on exit. One turn will be different from the next.
 
Reply
Old Nov 3, 2005 | 06:34 PM
  #6  
JMoney's Avatar
Joined: Nov 2005
Posts: 37
Likes: 0
From:
Default RE: sprocket ?

I had -1,+2 on my F3 and didn't like the RPMs as high as they were on the highway. My F4i has -1 in front and it seems to be a mild change on the highway.
 
Reply
Old Nov 7, 2005 | 10:42 PM
  #7  
hondasbest's Avatar
Joined: Nov 2005
Posts: 11
Likes: 0
From:
Default RE: sprocket ?

i have 2002 f4i went down 1 in front and up 3 in back, thing pulls unbelieveably, my bike a strictly a track bike and 15/49 is a great setup for track, for the street the r's are pretty high going thru town but on hi way or back road not to bad. watch out if you are on the street changing sprockets will affect speedo.
 
Reply
Old Nov 8, 2005 | 12:58 AM
  #8  
ceebear's Avatar
Member
Joined: Nov 2005
Posts: 82
Likes: 0
From: Dumfries, VA
Default RE: sprocket ?

i met a guy how had the 520 converson on the 05rr and it ran pretty hard.... i think ill head the same way....

BTW, whats the diffrence or what better?? 520 or 525???
 
Reply
Old Nov 8, 2005 | 05:20 AM
  #9  
ekathryn86's Avatar
Joined: Jul 2005
Posts: 58
Likes: 0
From:
Default RE: sprocket ?

Depends on how you use your bike and how you ride it. 525 is just the stock chain, going 520 will lighten the chain and it'll wear a little faster than stock. I went that way on my f4.. and I really enjoy it. Just dropped a tooth and put on an exhaust.. yea it hauls with my little tush on there. I got it cuz I wanted more low end and midrange.. which I got from the 520 conversion. I'm a sucker for speed and corners.
 
Reply
Old Nov 11, 2005 | 06:41 AM
  #10  
Air4Andy's Avatar
Joined: Apr 2005
Posts: 96
Likes: 1
From:
Default RE: sprocket ?

Hey, I have 03 F4i. Went with Power commander, 2 Bros Pipe and can, K&N, and 520 with -1/+2.
Bikes throttle VERY NICELY up (if that is what you are looking for) in first. And with slight effort in 2nd / much effort in 3rd (mostly just a 4" hop)
Power is incredible. RPM is Very tolerable in town. Doesn't change much. Top Speed is barely effected if any. === My recommendation!

PS: My only though for me is this may become my stunt bike (not hardcore, but more) and I was considering a 520 -1/+4 or . But that is overkill for wheelies and agressive riding!
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:13 PM.