Is there such a thing?

Long story short, I purchased the bike with it already installed, but no bracket.

I had to ghetto rig a way to hold the tag via zip ties, and that recently failed on me.

With that said, is there anyway to purchase a bracket, or do I need to make my own?

There is already a place to secure the tag to it, but there is a good few inches between the hole of the bracket and the license plate holes (can get pictures if it'll help)

If someone can point me in the right direction, I would appreciate it.

Thanks in advance,

Kyle

EDIT - Ran a search, and found this thread, but it seems like the Pimpbikes website doesn't work anymore.

https://cbrforum.com/forum/showthrea...+plate+bracket

 

I went to home depot and got a sheet of 20 gauge steel. Cut it into the shape of the license plate with another smaller rectangle above so I could fold it to mount to the actual undertail. Here are the results

 

Materials: 90 deg. angle steel, two flat 3/16" steel flats...weld together, grind down, drill holes, walla! oh dont forget the license plate bolt lights!

 

Sweet, thanks for the ideas.

I'm gonna make it over to Home Depot when I have some time off from work, and see what I can come up with.

 

can be done simply with to L brackets from any hardware store too. What mine had b4 I hacked the tag bracket portion off a 600RR underseat bracket I obtained.

 

ebay man.... 11 bucks shipped and everthing....

http://cgi.ebay.com/ebaymotors/Unive...Q5fAccessories

 

Nice!

From the looks of it, though, I'll have to take off the current bracket, and throw that one on instead.

Shouldn't be too big of a deal, though.

 

Mount your plate on the battery box underneath...