Hey everyone, I'm doing the tail swap on my 2006 f4i and I was going to order the pimpbikes undertail from eBay that keeps he stock tail light, then get one of the integrated turn signal tail lights and just mount the liscense plate on a bracket I'll make.

My question is if I will have any wiring difficulties, I'm thinking it's plug and play but I wasn't sure. My bike already has an integrated tail light in the banana seat tail.

My other question is how hard is it to figure out how to relocate the key doing the tail swap

 

Not hard at all.
Check this thread out:


https://cbrforum.com/forum/f4i-main-forum-11/please-help-pimpbike-undertail-question-97111/

https://cbrforum.com/forum/f4i-main-forum-11/undertail-97138/

Not sure, but I'm almost positive someone also posted a very good wiring diagram for the integrated tail-light in one of the above threads.

Hope this helps.

 

Neither are difficult at all, you'll be fine.

 

There's some info and pics in this thread. It's for the Hotbodies model but they are similar.

https://cbrforum.com/forum/f4i-main-forum-11/cheap-hotbodies-undertails-04-06-ebay-77894/

 

Cool thanks a lot guys, I figured it wouldn't be bad but I just wanted to ask. I appreciate the help. My bikes an 06 in the blue/black color and the entire tail section is going to black cause those are the cheapest parts could find for some reason, I'll put some pics up when I'm done, just waiting for the tail light and undertail to get here, can't wait to get it done.