Akrapovic slip on need clamp on '01
#1
Akrapovic slip on need clamp on '01
just put an Akropovic slip-on exhaust on my 01' F4I.
It seems to bekinda loose, I can wiggle it quite a bit even
with the passeger peg hanger tightened up.Or is this normal?
Is there supposed to be a clamp where the slip on meets the header? Or just the spring?
There is no gasket, so it seems like it may leak at the connection?
It seems to bekinda loose, I can wiggle it quite a bit even
with the passeger peg hanger tightened up.Or is this normal?
Is there supposed to be a clamp where the slip on meets the header? Or just the spring?
There is no gasket, so it seems like it may leak at the connection?
#2
#3
#4
#6
RE: Akrapovic slip on need clamp on '01
sounds alot better than stock. to me it has a very good smooth"race" sound, but not sostinking loud at normal
rpm that all my neighbors wouldhate me, but I twisted thethrottlea couple times last night after I installed it, and it
will scream if you want it to.
rpm that all my neighbors wouldhate me, but I twisted thethrottlea couple times last night after I installed it, and it
will scream if you want it to.
#7
RE: Akrapovic slip on need clamp on '01
I just happened to have my RH fairing off ('05).I'm gonna try and put some pictures in this post
[IMG]local://upfiles/8157/9C181D25E33B4810BE4777C27C41664E.jpg[/IMG]
[IMG]local://upfiles/8157/05700A5A16F54996AB42B311507E0D13.jpg[/IMG]
[IMG]local://upfiles/8157/90B8064008FB485894EEC6C8AE983405.jpg[/IMG]
[IMG]local://upfiles/8157/821EC800B03A4A5BBB09EFE1FC8AD585.jpg[/IMG]
[IMG]local://upfiles/8157/9C181D25E33B4810BE4777C27C41664E.jpg[/IMG]
[IMG]local://upfiles/8157/05700A5A16F54996AB42B311507E0D13.jpg[/IMG]
[IMG]local://upfiles/8157/90B8064008FB485894EEC6C8AE983405.jpg[/IMG]
[IMG]local://upfiles/8157/821EC800B03A4A5BBB09EFE1FC8AD585.jpg[/IMG]
#8
#9
RE: Akrapovic slip on need clamp on '01
That's funny. Mine doesn't wiggle at all. Totally solid! The link pipe fits very well on the header. The link to silencer joint is extremely tight. I actually put ceramic anti-seize paste on it so I could get it apart later! Are you sure you mounted the can properly?
[IMG]local://upfiles/8157/B0E351BACDEE4CAF9B90CB989DD41FBB.jpg[/IMG]
[IMG]local://upfiles/8157/B0E351BACDEE4CAF9B90CB989DD41FBB.jpg[/IMG]
#10