1st Post - How is my bike lowered?
#13
Check the easy stuff, spanner nut on shock backed off on rear, or dog bone replaced with wrong one?
And on the front check the shock shoulder protrusion through the top of the steering head, the stock height is supposed to be 33 mm. Are the preload adjusters backed all the way off?
Stock rear spring is yellow in color, so if it is any other color it may relate to your issue.
And on the front check the shock shoulder protrusion through the top of the steering head, the stock height is supposed to be 33 mm. Are the preload adjusters backed all the way off?
Stock rear spring is yellow in color, so if it is any other color it may relate to your issue.
Last edited by IDoDirt; 09-22-2013 at 07:31 PM. Reason: Edited photo link to inline.
#14
So just got the bike back, after putting in a new shock, this raised the bike up around 1/2" -3/4", which must have been part of the problem (possibly worn out? who knows), but it still sits about a half inch low... So after getting it back I did a rough measurement of the dogbone and it looks like it may be 14.39mm shorter than the measurement of 141.39mm you gave me for the stock length... If that is so that rounds out to 9/16 inch (probably 1/2 since I did a rough measurement) so I suppose the next step is to get a stock one ordered that is the correct length and all should be good! Much appreciated for the help on my first of many posts!
Also, where would be a good place to find a stock dogbone? I am having some trouble locating one.
Also, where would be a good place to find a stock dogbone? I am having some trouble locating one.
Last edited by SRap44; 09-29-2013 at 06:41 PM.
#15
Thread
Thread Starter
Forum
Replies
Last Post