F2 keeps popping ignition fuse
#1
F2 keeps popping ignition fuse
my F2 project bike has hit a snag; as soon as I click the run switch to "on" it pops the ignition fuse, but if i leave it in off the starter works (no spark though)
it didn't do this a week ago, but it just started.... nothing has changed wiring wise so I'm wondering if anyone has any ideas?
it didn't do this a week ago, but it just started.... nothing has changed wiring wise so I'm wondering if anyone has any ideas?
#2
#5
when mine did that, it was the connectors to the coils. if you notice, the coil's two connectors have a rubber cover over them - well mine some how got cut and the connectors were grounding out on the metal underneath them. i put electrical tape (several layers) underneath and that fixed my problem.
#7
when mine did that, it was the connectors to the coils. if you notice, the coil's two connectors have a rubber cover over them - well mine some how got cut and the connectors were grounding out on the metal underneath them. i put electrical tape (several layers) underneath and that fixed my problem.
also, idiot previous owner had the coils on upside down and I never noticed
it still won't run though :|
#8
#9
hmm, when I checked they were sparking pretty bright
I think its more I was trying to start it with no airbox on and it just couldn't get a rich enough mixture (and I didn't wanna try starter fluid lest it backfired)
#10