what the hell is going on?
#11
#12
#14
#15
#17
Look at your R/R. You should have a black or green wire, 3 wires of the same color, and an oddball wire, usually white or red. Test the voltage on that last one. Is it 12v?
Also, remove the RR from the bike (should be two quick bolts) and inspect it for physical deformities, like melting or warped spots. When replacing it, clean the underside and where it touches the frame, and apply some thermal compound if you have any.
Also, remove the RR from the bike (should be two quick bolts) and inspect it for physical deformities, like melting or warped spots. When replacing it, clean the underside and where it touches the frame, and apply some thermal compound if you have any.
#19
ok while i had all this off..their is a little yellow junction box down next to the ecm. looks like about 15 green wires (im guessing ground) go into it. the one on the very end is deffinetly fried burnt right through the box. so to by pass the box can i just splice the burnt wires into a good one? hoping this is the problem!!!
#20