I just got my bike out of storage and trying to get it back on the road. I put in a new battery and fresh gas. Except it will not start. There is no whine from the fuel pump. I have been searching the net looking for answers but have decided to just break down and ask. Where is the best possible place to get a detailed wiring diagram or does anyone have any ideas where to start? Possibly pictures of what they have done. Thanks in advance!

 

I just hardwired the pump rom the connector straight to the battery and got no response. Looks like a pump in my future.

 

See if this works for you.

 

Thank you!

 

Okay so I studied the wiring diagram and it looks like the green wire should be ground. I unplugged the harness and put my test light on all three wires with the ignition on and I tried hitting the start button also. All I get is the green to light up. Am I right or backwards?