Cept Metzeler m3's Well and of course the Metz's are cheaper

 

Well here's the pics. She's still dirty and damaged on one side a bit, but here we go.

 

You'll have to zoom that first one down to 75%. Sorry fng here. Let me try again.

 

One more time at 900.

 

Looks purdy good

 

Gotta replace and fix a couple things, but she runs pretty tight. I'll post better pics when I can get her cleaned up. Thanks all.

 

First ride will be tommorow morning, gently. Oh bye the way new to the sport bike theme. Rode the cruisers a bit though. Last ride was a Intruder 1800. Gotta respect the bike, I know. And thanks all for all the advice and help. Apparently the previouse owner dropped a tooth on the front sprocket, does that increase/decrease torque, or where would this affect me? Thanks again!

 

Nice looking bike man. Reminds me of mine when I first got her.

 

It will increase torque, 1st and 2nd gear will be noticeably snappier then stock, although i guess you wont know the differance since you didnt ride it stock. Just take it easy, gentle right hand, and dont hammer it on corners. Enjoy.

 

Watch yourself hitting about 4000 rpms with it down geared, Mine is down geared a lot and when i hit four grand and the "power band" kicks in on those bikes it can get away from ya if your getting into it. With one down in the front you should be ok though, mine is geared for stunting so it will stand straight up if im not careful. Im re-gearing mine back to what you have, its a good set up. Bike looks great too!