CBR 900RR 1993 - 1999 Honda CBR 900RR

need some opnions

Old Jun 16, 2014 | 06:45 PM
  #1  
Vinman911's Avatar
Thread Starter
|
Member & ROTM AUG 2013
Joined: Oct 2012
Posts: 139
Likes: 0
From: Douglasville, Ga
Default need some opnions

long story short, we picked up a 98 900rr that was wrecked. has 39,000 on it.
Upper faring was gone, rear farings destroyed, rear frame slightly bent. gas tank trashed, mirrors gone, upper stay broken, windshield mia, Side farings actually in good condition. bike was layed down in grass at what speed I don't know. Picked up bike for 800. put 1200 in it and it looks great, runs great. No smoke no nothing out tail pipe. I was able to get bike back together. new tank, ebay plastics, bunch of used parts and a bunch of new parts.


There was oil all down engine coming out of carb #1. We cleaned it off, bike smoked for 5 mins when we first fired it up when we went to buy it. I thought it was oil from being layed down. which it was. after 5 min of running no more smoke, motor runs awesome. shifts good also.


Well 400 miles later the oil is back. See pic. Coming out carb 1 and down block. This bike doesn't smoke at all.. Runs great.


What do you guys think might be the issue here? I was thinking valve stem seal. Any ideas? How long to you think the motor might last?


Thanks Vinman


Name:  oil_zps737a1c93.jpg
Views: 38
Size:  100.7 KB
 

Last edited by Vinman911; Jun 16, 2014 at 06:47 PM.
Reply
Old Jun 16, 2014 | 07:25 PM
  #2  
74demon's Avatar
Administrator and MVN, March 2012/Oct 2013 ROTM
Joined: Sep 2011
Posts: 12,193
Likes: 119
From: socal 949/951
Default

Is there oil inside the carb?
Maybe its leaking from the valve cover or a damaged head.
 
Reply
Old Jun 16, 2014 | 08:38 PM
  #3  
Vinman911's Avatar
Thread Starter
|
Member & ROTM AUG 2013
Joined: Oct 2012
Posts: 139
Likes: 0
From: Douglasville, Ga
Default

I dont know if oil is in carb. I won't be able to get to them till next weekend. I'm going to pull them off and check the boots to see if thier dry rotted. JC had a good point and said start there. I will check the V/C and see. Thanks.
I'm way to new to these 900's. More of a BMW (car) tech, but hope to learn about these carbed bad boys as much as I can. Already sync carbs, and have done fork seals. I can rebuild car motors. I hope to buy a 900 motor and tear it down.
 
Reply
Old Jun 16, 2014 | 09:47 PM
  #4  
jasonchristopher's Avatar
Senior Member
Joined: Sep 2012
Posts: 492
Likes: 4
From: boston
Default

you know vin if its not the boot then its the washer at that vaccum hookup spot..

looks like the boot..

oh and i almost forgot the guy was going over a hundred and forty while out on this run,going that fast the motoir was really moving and the pressure was high, ill put money its on the boot.. i'd even maybe try to re tighten it down and see what it looks like by the end of a couple runs ..
 

Last edited by jasonchristopher; Jun 16, 2014 at 09:50 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Murph317
F4i - Main Forum
3
May 22, 2006 09:15 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:31 AM.