Need info. 3 questions?
Thread Starter
|
Junior Member
Joined: Dec 2012
Posts: 9
Likes: 0
Need info. 3 questions?
1) is the sprocket hub on a 900 fireblade identical to the f3 cbr 600?
2) do they use the same diameter rear axe?
3) is the center hub on the fireblade wheel identical as the f3, but just the rim is wider?
i presently have and f3 rear rim on my custom race bike and looking a wider rim 5.5 inch, without to many alterations
webfootf3
2) do they use the same diameter rear axe?
3) is the center hub on the fireblade wheel identical as the f3, but just the rim is wider?
i presently have and f3 rear rim on my custom race bike and looking a wider rim 5.5 inch, without to many alterations
webfootf3
Last edited by gotcbr; Dec 13, 2012 at 04:03 PM. Reason: numbered for you
Senior Member & Lord of the Odometer (300,000 Mles) & Counting
Joined: Oct 2005
Posts: 812
Likes: 0
From: Rebel Cave in the Carolinas
6 spoke wheels
1) is the sprocket hub on a 900 fireblade identical to the f3 cbr 600? Yes.
2) do they use the same diameter rear axe? Yes
3) is the center hub on the fireblade wheel identical as the f3, but just the rim is wider?
Almost 600 F3 slightly narrower but can be an easy interchange, just spacers. Early RC51 is 6.00", SP1 00-01 and are same 6 spoke pattern as the 900RR/600F3, SP2 RC51 02+ later are 5 spoke, both SP1/2 use larger axles than 900RR/600F3 but the sprocket offset is different. Just in case you needed to know and can be made to work with a sleeve if it fits within the swingarm width alotted.
I presently have and f3 rear rim on my custom race bike and looking a wider rim 5.5 inch, without to many alterations.
The 900RR is a good choice.
webfootf3
2) do they use the same diameter rear axe? Yes
3) is the center hub on the fireblade wheel identical as the f3, but just the rim is wider?
Almost 600 F3 slightly narrower but can be an easy interchange, just spacers. Early RC51 is 6.00", SP1 00-01 and are same 6 spoke pattern as the 900RR/600F3, SP2 RC51 02+ later are 5 spoke, both SP1/2 use larger axles than 900RR/600F3 but the sprocket offset is different. Just in case you needed to know and can be made to work with a sleeve if it fits within the swingarm width alotted.
I presently have and f3 rear rim on my custom race bike and looking a wider rim 5.5 inch, without to many alterations.
The 900RR is a good choice.
webfootf3
Last edited by CBR1988; Dec 29, 2012 at 02:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post
JesseAwesome
F2 Tech
11
Aug 1, 2010 09:40 PM
