SpdyG_AK's new 07 white/silver build
#1
SpdyG_AK's new 07 white/silver build
It’s time for the new build thread!!
While I was recovering from the wreck (Thread) I decided not to wait to look for a new bike. I found a very clean looking 07 600RR with almost 11,000 miles. I would have much rather drove it home but as I was still recovering (it was less than 2 months)she had to come home from Huntsville AL on the trailer.
Picked me up a new AFX helmet and changed the inner shield from smoke to silver and added a few decals
While I was recovering from the wreck (Thread) I decided not to wait to look for a new bike. I found a very clean looking 07 600RR with almost 11,000 miles. I would have much rather drove it home but as I was still recovering (it was less than 2 months)she had to come home from Huntsville AL on the trailer.
Picked me up a new AFX helmet and changed the inner shield from smoke to silver and added a few decals
Last edited by Spdyg_AK; 03-24-2014 at 10:51 PM.
#2
The bike had many mods on it already:
Vortex rearsets
Vortex levers
Vortex clip ons (without risers which will be relevant later)
KR Tuned CF exhaust
Fender eliminator with LED tailight/brake light and turn signals
Flush mount front turn signals
SS front brake lines
Puig double bubble windscreen
Gear indicator
T-Rex frame sliders- no cut (will be changed)
T-Rex swingarm spools
T-Rex front and rear stands
Tech Spec tank pads
Honda rear seat cowl
Battery tender
Two scorpion helmets (both M, sold one immediately)
Joe Rocket Honda jacket
Joe Rocket gloves
Joe Rocket boots
I even found a kick stand pad (for dirt or soft surfaces) in the tail
Soooo, with all that “what more could I do to this bike” you say??
Decals!!
Needed a tank pad, lots of searching for just the right one
Vortex rearsets
Vortex levers
Vortex clip ons (without risers which will be relevant later)
KR Tuned CF exhaust
Fender eliminator with LED tailight/brake light and turn signals
Flush mount front turn signals
SS front brake lines
Puig double bubble windscreen
Gear indicator
T-Rex frame sliders- no cut (will be changed)
T-Rex swingarm spools
T-Rex front and rear stands
Tech Spec tank pads
Honda rear seat cowl
Battery tender
Two scorpion helmets (both M, sold one immediately)
Joe Rocket Honda jacket
Joe Rocket gloves
Joe Rocket boots
I even found a kick stand pad (for dirt or soft surfaces) in the tail
Soooo, with all that “what more could I do to this bike” you say??
Decals!!
Needed a tank pad, lots of searching for just the right one
Last edited by Spdyg_AK; 03-24-2014 at 10:28 PM.
#3
Got a few new goodies in...
Speedy Gonzales will go on the swingarm or the rear hugger. Core Moto brake lines, CF plate cover w/LEDs, solder heatshrink connectors for when I install my Spy5000 autostart alarm (yes it survived the wreck) and the bluetooth speaker set up is actually for a friend
The brake lines are smoked (CF look) front and white rear with reverse colored banjos- white/black
Speedy Gonzales will go on the swingarm or the rear hugger. Core Moto brake lines, CF plate cover w/LEDs, solder heatshrink connectors for when I install my Spy5000 autostart alarm (yes it survived the wreck) and the bluetooth speaker set up is actually for a friend
The brake lines are smoked (CF look) front and white rear with reverse colored banjos- white/black
#4
got the good news that the doc cleared me to ride as my wrist could handle it so I was officially back to it although I had put 200 “unapproved” miles on over the last week. I have my crampbuster on so I don’t have to grip the throttle too tight.
Now, the deal with the clip ons. Without risers the Vortex clip ons hit the front fairing stay so the PO cut it for clearance. Yes I said CUT IT
I can get a new fairing stay for $70 and I picked up some used OEM clip ons to return it to stock height.
And installed the D3 white grips with black collars
Now, the deal with the clip ons. Without risers the Vortex clip ons hit the front fairing stay so the PO cut it for clearance. Yes I said CUT IT
I can get a new fairing stay for $70 and I picked up some used OEM clip ons to return it to stock height.
And installed the D3 white grips with black collars
#5
#6
#7
Next up I ordered a big bundle of fun stuff from TST Industries
TST installation review
Integrated taillight
Carbon fiber undertail
Halo flush mount turn signals
Even got a free T-shirt
TST installation review
Integrated taillight
Carbon fiber undertail
Halo flush mount turn signals
Even got a free T-shirt
Last edited by Spdyg_AK; 03-27-2014 at 07:27 AM.
#10
You doing okay then too! All healed?