SpdyG_AK's new 07 white/silver build
5 Attachment(s)
It’s time for the new build thread!!
While I was recovering from the wreck (Thread) I decided not to wait to look for a new bike. I found a very clean looking 07 600RR with almost 11,000 miles. I would have much rather drove it home but as I was still recovering (it was less than 2 months)she had to come home from Huntsville AL on the trailer. Attachment 29603 Attachment 29604 Attachment 29605 Picked me up a new AFX helmet and changed the inner shield from smoke to silver and added a few decals Attachment 29606 Attachment 29607 |
4 Attachment(s)
The bike had many mods on it already:
Vortex rearsets Vortex levers Vortex clip ons (without risers which will be relevant later) KR Tuned CF exhaust Fender eliminator with LED tailight/brake light and turn signals Flush mount front turn signals SS front brake lines Puig double bubble windscreen Gear indicator T-Rex frame sliders- no cut (will be changed) T-Rex swingarm spools T-Rex front and rear stands Tech Spec tank pads Honda rear seat cowl Battery tender Two scorpion helmets (both M, sold one immediately) Joe Rocket Honda jacket Joe Rocket gloves Joe Rocket boots I even found a kick stand pad (for dirt or soft surfaces) in the tail Soooo, with all that “what more could I do to this bike” you say?? Decals!! Attachment 29599 Attachment 29600 Attachment 29601 Needed a tank pad, lots of searching for just the right one Attachment 29602 |
2 Attachment(s)
Got a few new goodies in...
Attachment 29597 Speedy Gonzales will go on the swingarm or the rear hugger. Core Moto brake lines, CF plate cover w/LEDs, solder heatshrink connectors for when I install my Spy5000 autostart alarm (yes it survived the wreck) and the bluetooth speaker set up is actually for a friend The brake lines are smoked (CF look) front and white rear with reverse colored banjos- white/black Attachment 29598 |
4 Attachment(s)
got the good news that the doc cleared me to ride as my wrist could handle it so I was officially back to it although I had put 200 “unapproved” miles on over the last week. I have my crampbuster on so I don’t have to grip the throttle too tight.
Now, the deal with the clip ons. Without risers the Vortex clip ons hit the front fairing stay so the PO cut it for clearance. Yes I said CUT IT Attachment 29593 Attachment 29593 I can get a new fairing stay for $70 and I picked up some used OEM clip ons to return it to stock height. Attachment 29595 And installed the D3 white grips with black collars Attachment 29596 |
4 Attachment(s)
My plate came in! I was so stoked to find it was available. The last person had it but didn’t renew since 2011 so she gave it to me!
Attachment 29589 A couple new decals were next. I'm all for personalizing your ride Attachment 29590 Attachment 29591 Attachment 29592 |
4 Attachment(s)
I got me some gator seat (since I'm in tha south) - haha
Attachment 29567 Time to get after a few more decals! Attachment 29568 Attachment 29569 Added some white stickers to cover up the gold rings on the rotors Attachment 29570 |
4 Attachment(s)
Next up I ordered a big bundle of fun stuff from TST Industries
TST installation review Integrated taillight Attachment 29562 Carbon fiber undertail Attachment 29563 Halo flush mount turn signals Attachment 29564 Even got a free T-shirt Attachment 29565 |
4 Attachment(s)
Before
Attachment 29558 After Attachment 29559 License plate bracket Attachment 29560 and finally a flasher relay to control the flash rate Attachment 29561 |
Lookin good! I had a 'stupid accident' last summer and am just getting back out there now. It's a great feelin ain't it.
|
Originally Posted by CorruptFile
(Post 1268834)
Lookin good! I had a 'stupid accident' last summer and am just getting back out there now. It's a great feelin ain't it.
You doing okay then too! All healed? |
All times are GMT -5. The time now is 03:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands