I have a 2006 Cbr600rr i lifted the tank to get to the starter. The bike ran fine before and now it’s cuts out around 9-10k rpm I’m thinking it’s a pinched fuel line I’ve take the bike for a ride with the tank up and it rides fine. Is there any special way to route the fuel line or make sure it doesn’t get pinched?

 

Line should go down and to left. Reach in from under left side of tank and make sure it's not pinched as you lower tank.

Also make sure MAP-sensor hose isn't disconnected or pinched as well.

 

thanks for the reply. I will half to check this out tomorrow and see if that’s the problem.