ugh broken headlight tabs
#1
#5
hey bammer...can you post a good picture of your fairing stay with the headlight attached....from what it looks like you mounted the headlight to the fairing stay...its supposed to mount to the front cowl...if you mounted it to the stay when you put your front cowl on the nose of it is going to have a serious lean toward the ground...then again i could be mistaken...i just don't remember bolting mine there don't remember pulling them out of the f4i the fairings were bought off
Last edited by orangef3; 05-22-2010 at 07:55 PM. Reason: forgot information
#6
#7
mine is bolted to the fairing stay at all, is what i'm getting at...i'm pretty sure that the only place that the headlight is bolted to is the five spots on the upper cowl...one in each corner and the one in the center of the headlight...i don't recall bolting it to the fairing stay. "I think" my bike is completely put together at the moment and really don't wanna take it apart to find out but i'm pretty sure that the headlight doesn't bolt there...all the other plastics i have seen the headlight just bolts to the upper cowl and the upper cowl to the stay and that's normally about it....sorry for the long post just don't want you to put your bike together just to realize that you will have to take it back apart because your nose is at a savage angle
#9
#10