Turn signal lag
#12
Finally I got the problem solved completely. No more lag, instant blinking !
I've replaced the whole switch assembly with a used one. It has been the biggest thing that was irritating me on the bike. It's still -22F outside (-30C). For a spring day, it is crazy cold, so I'll be waiting a little bit before taking out my bike.
I've replaced the whole switch assembly with a used one. It has been the biggest thing that was irritating me on the bike. It's still -22F outside (-30C). For a spring day, it is crazy cold, so I'll be waiting a little bit before taking out my bike.
#13
In addition to the switch housing, the piece that slides can be removed as well, at least mine could, and that can be cleaned under and around the pivot points, a lil tricky to get under it, q tip worked great for me. Id take a closer look at your original part and see if all that was done, and you will have a spare.
-Poss
-Poss
Thread
Thread Starter
Forum
Replies
Last Post
Cun0144
F4i - Main Forum
3
09-23-2008 10:04 AM