Rear wheel bearings were bad
#11
someone new is trying to install those for ya at the shop... i didnt have a press but i just used a rubber mallet/hammer and was very gentle when hitting.. only hit the rim of the bearings so i wouldnt break those beeds inside. worked great. changed all three on the rear and thinking about doin the front..
neone know how much the fronts are?? 30bucks?.. also, there has been some noise from the front tire like a bear pad rubbing??
neone know how much the fronts are?? 30bucks?.. also, there has been some noise from the front tire like a bear pad rubbing??
#12
someone new is trying to install those for ya at the shop... i didnt have a press but i just used a rubber mallet/hammer and was very gentle when hitting.. only hit the rim of the bearings so i wouldnt break those beeds inside. worked great. changed all three on the rear and thinking about doin the front..
neone know how much the fronts are?? 30bucks?.. also, there has been some noise from the front tire like a bear pad rubbing??
neone know how much the fronts are?? 30bucks?.. also, there has been some noise from the front tire like a bear pad rubbing??
the grease in the bearing were all in my rim not in the bearing...imma tlk to the honda dealer n see what they can do about this
#13
so i got the kit for the rear wheel bearings and installed them.. Only one of three were not good but that is what the 'wiggle' in my rear tire was doing.. So i changed all 3 out but i was wondering that maybe the front needs to be changed??? Do the bearings get bad w/ alot of weight on that back tire or just from wear/tear....??? Or maybe potholes? Or a friends ****ty driveway?
Thread
Thread Starter
Forum
Replies
Last Post