I want to get these turn signals for my bike. I have never ran anything electrical on it and have no idea where the turn signals run to and hook up to. Wear would i hook them up to??



http://cgi.ebay.com/ebaymotors/Honda...ayphotohosting

[IMG]local://upfiles/22981/78E2F5DDE5394E31BEE2EB55E5BCE673.jpg[/IMG]

 

well they are supposed to replace the stock running lights/turn signals thatthe bike already has. So you would hook those new signals up too the wires that your current signals use. Depending on how those signals are made you may lose the ability to have running lights unless you install a diode.

 

there are 3 wires on you bike to receive those signals u will only need to use two .u use the red n the black the ground one normally with a stripe in it u wont need . be careful with those because if that is your stock turn signals in the pic you may have a hole in your fairings n those signals may be to small to cover the hole .I would also recommend a signal you bolt on .i dont trust that sticky stuff at high speeds