My bike is surging / jolting / hesitant
#11
@Drew2785 Do you have an F3? Why are you trying to bypass the Air Vent Solenoid Valve? That is what helps ensure the carburetors perform optimally between slow speeds and higher speeds when it has to deal with the ram air effect. The Air Vent Solenoid Valve controls the pressure of the air in the airspace in the upper half of the float bowls. The light blue shows the air path below 12mph, and the orange is for above. The purple is the path it takes to get into the carburetor bodies.
In this picture, item #4 is a hole in the upper part of the Carburetor Body (the carburetors are upside-down in this picture). The Air Vent Solenoid Valve controls where the air is coming from. Below 12mph, the air comes from little "Deer Whistle" looking intakes right below the headlight. Above 12mph, the air is supplied from the main air intake duct which is being pressurized by the movement of the motorcycle as it moves forward.
Item #6 in the image below is what the Air Vent Solenoid Valve is supplying. The is one of the T fittings between each of the 2 carburetors. Between 1 and 2 as well as 3 and 4.
In this picture, item #4 is a hole in the upper part of the Carburetor Body (the carburetors are upside-down in this picture). The Air Vent Solenoid Valve controls where the air is coming from. Below 12mph, the air comes from little "Deer Whistle" looking intakes right below the headlight. Above 12mph, the air is supplied from the main air intake duct which is being pressurized by the movement of the motorcycle as it moves forward.
Item #6 in the image below is what the Air Vent Solenoid Valve is supplying. The is one of the T fittings between each of the 2 carburetors. Between 1 and 2 as well as 3 and 4.
#12
Thank you
@Drew2785 Do you have an F3? Why are you trying to bypass the Air Vent Solenoid Valve? That is what helps ensure the carburetors perform optimally between slow speeds and higher speeds when it has to deal with the ram air effect. The Air Vent Solenoid Valve controls the pressure of the air in the airspace in the upper half of the float bowls. The light blue shows the air path below 12mph, and the orange is for above. The purple is the path it takes to get into the carburetor bodies.
In this picture, item #4 is a hole in the upper part of the Carburetor Body (the carburetors are upside-down in this picture). The Air Vent Solenoid Valve controls where the air is coming from. Below 12mph, the air comes from little "Deer Whistle" looking intakes right below the headlight. Above 12mph, the air is supplied from the main air intake duct which is being pressurized by the movement of the motorcycle as it moves forward.
Thank you very much for the help I have had the fairings taken off and the bike would jump round like a kangaroo when I try and open it up in high revs then had the air solenoid bypassed now it floods at low end and a beast at high end
Item #6 in the image below is what the Air Vent Solenoid Valve is supplying. The is one of the T fittings between each of the 2 carburetors. Between 1 and 2 as well as 3 and 4.
In this picture, item #4 is a hole in the upper part of the Carburetor Body (the carburetors are upside-down in this picture). The Air Vent Solenoid Valve controls where the air is coming from. Below 12mph, the air comes from little "Deer Whistle" looking intakes right below the headlight. Above 12mph, the air is supplied from the main air intake duct which is being pressurized by the movement of the motorcycle as it moves forward.
Thank you very much for the help I have had the fairings taken off and the bike would jump round like a kangaroo when I try and open it up in high revs then had the air solenoid bypassed now it floods at low end and a beast at high end
Item #6 in the image below is what the Air Vent Solenoid Valve is supplying. The is one of the T fittings between each of the 2 carburetors. Between 1 and 2 as well as 3 and 4.
#14
Last edited by Drew2785; 12-10-2021 at 05:14 PM. Reason: More info
#16
Headlight Wiring
So i have been building this 96 cbr600f3 streetfighter..She is a bad beast..But after I took the guages off and mounted an old school headlight, the bike surges sporatically. When i pulled the gauges i had to chop all the plugs that go into them in order to fit the harness into the headlight..I didn't really tape off all of the wire ends either. Is it possible that one of them could be grounding out? I just ran through the carbs, checked for vacuum leaks, checked fuel pump, changed the spark plugs, changed the fuel filter, so I know it has to be electrical. This would make sense because when it comes to wiring i have NO IDEA what im doing. My question is this: What should i check for in the wiring on the harness? Should i tape off all of these wire ends that i chopped? Thanks in advance for any advice!
I figured i would post a pic of the f3 im doing..I did the cbr600rr tail conversion myself..As long as you have a welder and some time its an awesome beginner's fabrication project!
Attachment 40739
I figured i would post a pic of the f3 im doing..I did the cbr600rr tail conversion myself..As long as you have a welder and some time its an awesome beginner's fabrication project!
Attachment 40739
Howdy i am looking to find out how you wired up ur headlight as i’m looking to do the same it not similar one
Thread
Thread Starter
Forum
Replies
Last Post