I am new to the forums, and i had wrecked my bike last year which is a '95 cbr600. I cant find the replacement '95 panels anywhere, but i can find the 97-98 panels everywhere. Now, are the panels a direct bolt on? I thought i read before that the only difference is like you have to change out the tail light section or something. Could you guys give me some advice please on what i'd need to do to put the 97-98 fairings on the 95 bike?

Here is a link to the site i found the new fairings:
http://www.motorcycle-fairing.com/ho...a-fairings.htm

Are these good replacements?

I've also seen a lot on ebay for less money now after searching around a bit. They have quite the selection on ebay but are all 97-98.

Thanks!
Jason

 

how much you willing to spend, cause ebay has all kinds of them. They are from Hong Kong but they bolt on very nicley and are prepainted

 

Yeah, the ones from hong kong are the ones i was talking about. the reason i asked is because i thought i saw somewhere before about something needed to be changed since the fairings that go along the side of the seat are different.

The ones from hong kong look killer! They have some real nice black and orange ones. But then i'd look too much like my brother's hayabusa. lol

Jason

 

ill sell you a taillight off a 98

 

You need the tail light assy, and the seat from a 97-98. The newer seat extends further from the side cover to the tank. Trust me, you need the seat to make thinks look perfect!

 

Do you know how much or where i could find the tail light assembly?

And if i dont have the funds for the newer seat right away then will the old seat at least still fit on the bike with the new panels?

Jason

 

You also need the 1997-98 rear fender (undertail).

Check here: https://cbrforum.com/forum/cbr-600f3-17/how-1997-98-f3-tail-section-swap-your-1991-96-f3-91194/


.

 

Hey, thanks for that link! That was really helpful. Now to track down all the parts i need.... =/

Jason

 

i plan on doing the same and the web site has fairings for 95 and 96 f3's but says that you need to update the tail section is this implying to put the 97 98 under tail n tail light and seat etc for the bike ?