I did search, but came up with nothing.... Is there a USD fork that will bolt right up to an F2? How about having to enlarge the holes for the fork tubes on the yoke? Any help will be appreciated. -Fred

 

Don't cut the triple clamps (yoke),you'll be in the ICU the first time you bend it in a turn.The best way is to get a 900rr front end and toss that together.That's the cheapest way.Custom triples are very expensive.

 

gsxr forks will work. 95 gsxr triple clamps bolt up to the f2

 

I am in the process of installing '94 GSXR forks on my bike primarily because the fork legs are anodized blue ('94 750SP was the only year) and my current GSXR 600 forks started to seep fluid. I bought them used with the triple clamps. I am having both sets of forks serviced with new seals at this time through a trained by Race Tech mechanic. When I am done, I will be selling the triple clamps from the '94 GSXR 750 and the fork legs from the '92 GSXR 600 (upper fork tubes are same outside diameter so they match perfect). When I ordered seals, the part numbers were the same for '94-'95. The same may be true with the triple clamps. I will do some research on this. If they are a match, I will have a nice set up ready to go for sale in the next couple weeks. Stay tuned.....

 

Hey, maddcapper... PM'd ya! What wheel does it use? F3 / 3 ? Or GIXER?