clutch issue....
#1
clutch issue....
So my buddy wrecked his f2 pretty good. the crank got pushed thru.
so he got a engine off of ebay and I installed it.. today I finally got the rest of the parts on to make it ridable and I find that the clutch will not disengage. I have tryed to adjust it to the limits and back, with no luck.
It needs an oil change badly and I have no clue on the age of the oil, I read im my manual the old oil can cause clutch issues.. do you think I should try some new oil in it or just switch out the clutch? any advise would be kick ***
so he got a engine off of ebay and I installed it.. today I finally got the rest of the parts on to make it ridable and I find that the clutch will not disengage. I have tryed to adjust it to the limits and back, with no luck.
It needs an oil change badly and I have no clue on the age of the oil, I read im my manual the old oil can cause clutch issues.. do you think I should try some new oil in it or just switch out the clutch? any advise would be kick ***
#2
#3
RE: clutch issue....
I have the same problem, but I took my entire clutch apart to replace the shift forks. Now I can't get the clutch to disengage.
Can anyone tell me the proper procedure for reinstalling a clutch? How far does the clutch plate have to be in the clutch basket?
Is there a certain torque setting I need to tighten the bolts down to?
Thanks for any help.
Can anyone tell me the proper procedure for reinstalling a clutch? How far does the clutch plate have to be in the clutch basket?
Is there a certain torque setting I need to tighten the bolts down to?
Thanks for any help.
#4
#5
#6
RE: clutch issue....
ORIGINAL: Zangetsu
Help an F2 bruthah out.
How did you know how far to install the clutch plate?
Can you give me a quick How To?
I've had the clutch off and on so many times, I agree that it's easy to do, but I just can't seem to get the clutch plate in the right spot.
Help an F2 bruthah out.
How did you know how far to install the clutch plate?
Can you give me a quick How To?
I've had the clutch off and on so many times, I agree that it's easy to do, but I just can't seem to get the clutch plate in the right spot.
#7
RE: clutch issue....
ORIGINAL: Zangetsu
Help an F2 bruthah out.
How did you know how far to install the clutch plate?
Can you give me a quick How To?
I've had the clutch off and on so many times, I agree that it's easy to do, but I just can't seem to get the clutch plate in the right spot.
Help an F2 bruthah out.
How did you know how far to install the clutch plate?
Can you give me a quick How To?
I've had the clutch off and on so many times, I agree that it's easy to do, but I just can't seem to get the clutch plate in the right spot.
#8
RE: clutch issue....
bindel,
Thanks for the advice in the PM - I'll check it all out tomorrow night.
zoom,
https://cbrforum.com/m_327085/tm.htm
Thanks a zillion, bruthah!
I had no idea there was a downloadable manual available.
I was searching for "F2 clutch".
Thanks for the advice in the PM - I'll check it all out tomorrow night.
zoom,
https://cbrforum.com/m_327085/tm.htm
Thanks a zillion, bruthah!
I had no idea there was a downloadable manual available.
I was searching for "F2 clutch".