CBR 600F 1987 - 1990 CBR 600F Forum

speedometer

Thread Tools
 
Search this Thread
 
Old May 6, 2008 | 08:30 PM
  #1  
ken12's Avatar
Thread Starter
Joined: Mar 2007
Posts: 55
Likes: 0
Default speedometer

mygauge says im going 5 mph faster then im actually going. what does everyone think i should check? i have 32,1xx on it, do you think its just the cable or what? thanks ken
 
Reply
Old May 6, 2008 | 08:33 PM
  #2  
mitchedwards81's Avatar
Senior Member
Joined: Dec 2006
Posts: 105
Likes: 0
From: Douglasville, Ga
Default RE: speedometer

is it the stock size tire?
 
Reply
Old May 6, 2008 | 08:37 PM
  #3  
ken12's Avatar
Thread Starter
Joined: Mar 2007
Posts: 55
Likes: 0
Default RE: speedometer

yea the front and rear are both 17's the sidewall in the front is an 80 but i dont think that would effect it
 
Reply
Old May 6, 2008 | 09:20 PM
  #4  
Gogar's Avatar
Senior Member
Joined: Sep 2007
Posts: 272
Likes: 0
From:
Default RE: speedometer

If your front is a 110/80-17 that's the right size. Remember though, that the second number is not the actual height of the sidewall, just a proportion of the width.

110/80-17 vs 120/80-17 the sidewall on the second tire will be (barely) bigger.

Anyway, a bigger sidewall would make your speedo read too slow, not too fast.

It's probably fine. Many manufactures build in a little "extra" on their speedo readings. If a manufacturer made a speedo that, say, read too slow and someone got a speeding ticket they could conceivably look for recourse with the manufacturer of the vehicle for the speeding ticket.

If they build the speedos a tiny bit too FAST, they don't have this problem.

 
Reply
Old May 7, 2008 | 05:14 PM
  #5  
ken12's Avatar
Thread Starter
Joined: Mar 2007
Posts: 55
Likes: 0
Default RE: speedometer

thanks gogar..so no one else has any problems with their speedo?
 
Reply
Old May 7, 2008 | 05:29 PM
  #6  
michigan_313's Avatar
Senior Member
Joined: Feb 2006
Posts: 778
Likes: 1
Default RE: speedometer

i have problem but that is because i relocated mine to the output shaft. it works but is about 15mph off/faster.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Caleb
CBR 600F2
5
May 8, 2009 12:08 PM
90f1rider
CBR 600F
1
Apr 23, 2007 12:08 AM




All times are GMT -5. The time now is 02:26 AM.