I have an 87 Hurricane 600. I am almost done. For the one that requested the pictures, I swear I have them shot and will post. I have been staying at motels and away from home...... Anyway; THE QUESTION:
Will the valves of a 94 F2 fit my 87 F1? I have checked all gaps, depths and widths and have only run into one snag....... ONE BENT VALVE! I have that extra motor from an engine swap that the customer didn't want and I would rather spend 0000$$$$$ and use parts available if possible. Please comment..... Thank You to all you fun loving speed guru's!!!!!

 

94 ex valve p/n 14721-MAL-600
87 ex valve p/n 14721-MN4-010
somethings gotta be different about them. you might still try and measure them to see. F2s also used shims to adjust the valves.

 

I have a junk head laying here and might be able to help you out. Let me know what valve you need, I assume intake from the pictures but want to be sure. Email me an address and I will send it out to you. It is out of an 89 F1 that was run out of oil and the cam race is bad so this allows me to be able to "pay it forward" and help a fellow rider out and salvage some of the parts that are still good. My email is gadamson@woh.rr.com

Micah