I was wondering what size pin fits the hole at the bottom of the triple trees for a headlift stand on a 2008 CBR 1000 RR? Thanks

 

Chart to help for Pitbull stands

http://www.revzilla.com/assets/0000/..._stand_pin.pdf

 

If I read that right, your bike is a "std pin + #1 adapter". Not much help. But it lists that same thing for my bike and it's a 24mm pin. I couldn't find a reasonably priced stand that came with a 24mm pin in Canada, so I use a 17mm pin with a 17mm deep socket. Fits the 24mm hole perfectly.

 

Im going to try this, I have tons of spare sockets laying around, thanks

 

Just to check back I used a 5/8 deep well socket and it worked great. Sad part is I used one of my snap on sockets should have just went out and bought a cheap socket, but whatever it worked.