I posted a thread in the noobie section, but basically I have a 90cbr 1000f. First object is getting it running, getting fuel, and turns over, just not getting spark.. once I get it running I really need to gather up at least the top faring with the headlight and blinker, as the bike came without farings, it did come with a seat, tank and rear tail faring. But the engine farings, some of the dash stuff and the sissy bar aren't there. So I will attempt to piece it together, even if I have to rock it naked for the time being. Any insight will be greatly appreciated!

 

Well, I believe we found the issue. Bike sat for 9 years without running. Carbs are gummed up, gonna dip them and clean them, its getting spark. Just not fuel. Hopefully cleaning the carbs solves the issue!

 

welcome
glad your working to get her going again

 

Put up a list of the bits you need and let's see what comes out of the woodwork. I have some gauges and other stuff, but we all have loads of bits "in the shed" for a rainy day......

Welcome to the asylum !

 

i need:
grab bar
gauge Cluster
Information cluster
coolant overflow tank
screws
top fairing
both (belly) fairings
the fuel on/off ring on the seat
brake lever
mirrors
headlight
turn signal

i have a coworker with a 1991 crb 600 f2 hes giving me all of the fairings and lights off it, im not sure what i can make fit, if anything. and im sure there are other odds and ends ill need along the way.

 

Hi,
Firstly welcome to the forum.
Not sure where you are but I have a pair of levers for a '93. If they fit yours we can sort something out.
Guys, anyone know if 93 levers will fit a 90?

Cheers and good luck

Rich

 

p.s got a set of mirrors too. bit worn but useable.

 

I'm in Washington state. I can pay for shipping! Pictures please? Or text me 425-293-9082

 

Levers will fit - mirrors will take a bit of "making them fit" diff distance between
bolt holes - sorry no spares here LL

Welcome to the Forum btw

 

So. Motor is no good. I think I'm going to give up on this project. The spare bike is an 88 1000f I wonder if it will swap in no issues?anyone have any insight on this?
The compression test results were 120-30-0-60.