CBRF Decals
........if Kelly hasn't got pi55ed at us by now
#232
10-16-2009, 10:32 PM
Guest
Posts: n/a
I think where we left off was with ...
The main hold up was the final choice ..
I got 5 different types suggested and the Chain wanted the ROTM one as well ...
That's all good , but it was going to cost a ton to do all of them in any reasonable numbers ..
We need to rationalize the choice of them guys ...
The up shot was that I looked at shipping/mailing them out from here and I thought it was going to run about $12.00 AUD per letter sized delivery to the States for example ...
BUT ...I have since found out that it is only about $1.50 by normal Air Mail to near anywhere in the world (4 - 5 days) so it would be fine 
The freakin upshot of all this , is that I sortta forgot about it till now ...
Ok ... I promise that I will get a few done and get them out ASAP...
It is a 10 day turn around for the ordering of them here ....so I will get my **** into gear ..
I am going to try to get small runs done to test them out ...
ROTM - will be this one
For generic use across the Forum
For the 1000F guys
Might be able to do some of the others after wards ...
Think I will do them on Clear back grounds so once put on you only see the actual sticker ??
So ... that's where, what and why we are, where we are I think
The main hold up was the final choice ..
I got 5 different types suggested and the Chain wanted the ROTM one as well ...
That's all good , but it was going to cost a ton to do all of them in any reasonable numbers ..
We need to rationalize the choice of them guys ...
The up shot was that I looked at shipping/mailing them out from here and I thought it was going to run about $12.00 AUD per letter sized delivery to the States for example
... BUT
...I have since found out that it is only about $1.50 by normal Air Mail to near anywhere in the world (4 - 5 days) so it would be fine The freakin upshot of all this , is that I sortta forgot about it till now ...
Ok ... I promise that I will get a few done and get them out ASAP...
It is a 10 day turn around for the ordering of them here ....so I will get my **** into gear ..
I am going to try to get small runs done to test them out ...
ROTM - will be this one
For generic use across the Forum
For the 1000F guys
Might be able to do some of the others after wards ...
Think I will do them on Clear back grounds so once put on you only see the actual sticker ??
So ... that's where, what and why we are, where we are
I think
#233
10-17-2009, 09:54 AM
Member
Join Date: Jun 2009
Location: Fort Lauderdale, FL
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
#234
10-17-2009, 09:56 AM
Administrator - Retired
#236
10-21-2009, 11:30 PM
Guest
Posts: n/a
UPDATE ...
Was getting final quotes for them ..or thought I was ..? :-(
Sent 2 lots of sample images with our requirements to them ...and have been waiting for replies ...
Well we got knocked back by both of the sticker companies ...
The runs are too small and the different types present an art work cost issue it seems.....
After 2 emails sorting out what we needed with this company ...I got this reply only a day or so ago ...
So ****ed if I know .....
I have one other reply to still come back , then its off again searching for another supplier to try ...
Was getting final quotes for them ..or thought I was ..? :-(
Sent 2 lots of sample images with our requirements to them ...and have been waiting for replies ...
Well we got knocked back by both of the sticker companies ...
The runs are too small and the different types present an art work cost issue it seems.....
After 2 emails sorting out what we needed with this company ...I got this reply only a day or so ago ...
Hi Steve,
Thank you for your clarification.
Unfortunately this does not seem like a job for us. The minimum order for vinyl plastic stickers with us in 1,000 pieces per artwork. This is due to the high setup cost in vinyl sticker setup. Other business who provide provide vinyl stickers on large plates (mixed with other customer's artworks) may have a lower price and minimum order but also a lower quality.
We are sorry we can't assist you with this matter. Please let us know if we can help with anything else.
Best regards,
Barry
Thank you for your clarification.
Unfortunately this does not seem like a job for us. The minimum order for vinyl plastic stickers with us in 1,000 pieces per artwork. This is due to the high setup cost in vinyl sticker setup. Other business who provide provide vinyl stickers on large plates (mixed with other customer's artworks) may have a lower price and minimum order but also a lower quality.
We are sorry we can't assist you with this matter. Please let us know if we can help with anything else.
Best regards,
Barry
.....I have one other reply to still come back , then its off again searching for another supplier to try ...
#238
10-22-2009, 05:29 PM
#239
10-23-2009, 01:22 AM
Guest
Posts: n/a
Yer ...home made ones might be a bit doggy ....
I put a quote reqest into stickergiant.com to see how much they are ....but it looks like about 4 bucks each ...plus during the quoting form it suggests about 500 - 1000 per order ...
anyone got a spare $4000,00 that they want to throw at this ?....LOL
I am waiting on one more other quote to come back and they seemed pretty easy to get along with ...so we shall see ...
I put a quote reqest into stickergiant.com to see how much they are ....but it looks like about 4 bucks each ...plus during the quoting form it suggests about 500 - 1000 per order ...
anyone got a spare $4000,00 that they want to throw at this ?....LOL
I am waiting on one more other quote to come back and they seemed pretty easy to get along with ...so we shall see ...
#240
10-23-2009, 06:33 PM
Good deal Steve appreciate all your effort and yeah it's in quantity where
the discounts are given.
Maybe if we polled everyone for like a pre order quantity ya might get an
idea of whether we're talking 150 or 550 ...........maybe the "beltstretcher"
has some ideas with a big picture perspective in mind. !
the discounts are given.
Maybe if we polled everyone for like a pre order quantity ya might get an
idea of whether we're talking 150 or 550 ...........maybe the "beltstretcher"
has some ideas with a big picture perspective in mind. !