1000f -89 wont start, help!!
#1
1000f -89 wont start, help!!
1000f -89 wont start, help!!
so I'm running out of ideas, have changed coils, wires, starter clunch and the other small clunch thats on the charger axel. it gets fuel, air, spark and it turns still nothing somethimes gives a lill promise of starting (max 2seconds) but still nothing! last summer ajusted carburators, it worked just fine and one day after work it didnt started.. PLEASE I really need help!!!!
so I'm running out of ideas, have changed coils, wires, starter clunch and the other small clunch thats on the charger axel. it gets fuel, air, spark and it turns still nothing somethimes gives a lill promise of starting (max 2seconds) but still nothing! last summer ajusted carburators, it worked just fine and one day after work it didnt started.. PLEASE I really need help!!!!
#3
#4
#5
Join Date: Aug 2008
Location: Republic of Boon Island
Posts: 11,004
Likes: 0
Received 3 Likes
on
3 Posts
If it's a starter damper issue then Shadow knows all about that .........
Here's an example of starter damper problems
http://www.youtube.com/watch?v=kfgqjgIeoqk
Here's an example of starter damper problems
http://www.youtube.com/watch?v=kfgqjgIeoqk
#6
hi!
thanks for quick replys, yes I have tryed start with a car batery(car not running) without result, all hoses are conected, and it gets fuel, yesterday I checked the plugs (again) every one sparks, but with a tiny tiny spark. I suspected the bike batery but still didnt start with car batery..? already renued (new) starter cluntsh and one little clunch on the charger axel where the chain conects from cam shaft(?)
why can't jump start with car running? (havent done it yet, but the temtation is big...heh!)
why can't jump start with car running? (havent done it yet, but the temtation is big...heh!)
#7
Join Date: Aug 2008
Location: Republic of Boon Island
Posts: 11,004
Likes: 0
Received 3 Likes
on
3 Posts
Don't jump from car with running ...........too much juice .........y'll fry her ***
Timing issue maybe ?? Valves
Borrow a compression tester start there.......test all 4
Then check timing
Just re read your post..........define tiny spark..........as in hardly any ?
Also as Shadow says ...........CHOKE working right ?
Timing issue maybe ?? Valves
Borrow a compression tester start there.......test all 4
Then check timing
Just re read your post..........define tiny spark..........as in hardly any ?
Also as Shadow says ...........CHOKE working right ?
Last edited by Sprock; 07-17-2009 at 08:22 AM.