flush mounts/ fender eliminator
#11
#12
#13
#14
RE: flush mounts/ fender eliminator
dondi,
GSXR mirror install went well.
The only change to the fairing was the holes for the signal wires.
Most of the time was spent modifying the stay. There are a couple pictures of the stay in my gallery:
https://cbrforum.com/albumphoto.asp?...amp;sortType=6
GSXR mirror install went well.
The only change to the fairing was the holes for the signal wires.
Most of the time was spent modifying the stay. There are a couple pictures of the stay in my gallery:
https://cbrforum.com/albumphoto.asp?...amp;sortType=6
#15
#16
RE: flush mounts/ fender eliminator
ORIGINAL: kodiak1122
Proton Flush Mounts [sm=smiley20.gif]
http://www.tricktape.com/index.asp?P...mp;ProdID=5509
Competition Werkes Fender eliminator [sm=smiley20.gif]
http://www.competitionwerkes.com/
Proton Flush Mounts [sm=smiley20.gif]
http://www.tricktape.com/index.asp?P...mp;ProdID=5509
Competition Werkes Fender eliminator [sm=smiley20.gif]
http://www.competitionwerkes.com/
#17
#18
RE: flush mounts/ fender eliminator
If you want to keep the running light functionality; Watsen Design has a module they add to their flushmounts that runs the LEDs at half power for theruning light, and then brings them up to full intensity for the signal light.
they sell the module by itself but they don't advertise that. you need to call them and ask them.
I did that because I wanted the Rizomas with Running light functionality, but If you want Flushmounts, theirs are some of the best out there. (Made of aluminum instead of plastic, 3 different designs; 3, 8 , or 10 LED to choose from, the afore mentioned running light module, and they make them model specific, for a perfect fit, as oposed to the "close enough" universal fit ones)
For the tail, your best bet is the integrated taillight and any tag mount that includes a light.
If you're keeping the stock pipe, look for Blue Fox's "racoon tail" mod on the How to forum for one of the best ways to dress up the tail.
they sell the module by itself but they don't advertise that. you need to call them and ask them.
I did that because I wanted the Rizomas with Running light functionality, but If you want Flushmounts, theirs are some of the best out there. (Made of aluminum instead of plastic, 3 different designs; 3, 8 , or 10 LED to choose from, the afore mentioned running light module, and they make them model specific, for a perfect fit, as oposed to the "close enough" universal fit ones)
For the tail, your best bet is the integrated taillight and any tag mount that includes a light.
If you're keeping the stock pipe, look for Blue Fox's "racoon tail" mod on the How to forum for one of the best ways to dress up the tail.
#20
RE: flush mounts/ fender eliminator
Protons are the only way to go - running lights with built in resistors to slow the blinking rate tonormal. I believe the Watsens are also running lights but you need to install the resistors seperate (not that big of a deal). I've got the Protons and am 100% satisfied.
Thread
Thread Starter
Forum
Replies
Last Post
Swim_Coach
CBR 1000RR
8
07-30-2007 01:58 PM
competition, eliminator, fender, florida, flush, integrated, kit, law, lights, mount, mounts, proton, tail, tgah6tk, werkes