Barkers CBR F3 build...the CRF3
#1
Barkers CBR F3 build...the CRF3
Well just became a member here I picked up a 1995 CBR F3 with a 97 basket case for spare parts to use and fund the project. It started out missing alot of the fairings and needed some TLC so from the start I was looking to build a streetfighter. Once I got it to school my buddy beside me was redoing a CR80 so messing around we put the front plate on it and then laid the seat on the cbr and the idea was born to do a supermotard/streetfighter bike ..Heres whats happend in about a week of work.
Got it home like this...
Brought it to school for the tear down!
Tossing around ideas..
Tear down...
Cutting all of the fairing tabs off
Scrubbed the frame down and got all of the grim off
Installed the risers
Cleaned the build up and gunk off of the engine
Painted the side covers and put in new gaskets..
Got it home like this...
Brought it to school for the tear down!
Tossing around ideas..
Tear down...
Cutting all of the fairing tabs off
Scrubbed the frame down and got all of the grim off
Installed the risers
Cleaned the build up and gunk off of the engine
Painted the side covers and put in new gaskets..
#4
Well picked up a CRF 450 seat and spent the day cutting on the seat and frame to "try" and get everything to line up...I have everything mocked up to start tacking things in..Only spot thats really bothering me is the transition from seat to tank at the bottom of the tank...I had to narrow the rear end so much it makes my rear tire look HUGE...lol
#5
#6
I'm running a 180 right now but I'll prob take it back to a 160 so that I can run a whole hugger fender. I'm just going to use some 7/8 dirt bike bars with a cross pad. I've still gotta cut some foam out of the seat and shape it a little better to get the wrinkles out of it. Tommorow hopefully I can get everything welded in, and all of the spots where I cut the fairing tabs off smoothed out. I'll probably just rattle can "dust" over the frame to bring it back to life. I'm trying to keep the tail section sort of a "trellis frame" look. If I've got enough time hopefully I can get the engine hanging back in...
#7
Well didn't get anywhere near I wanted to be today..lol..I had a guy come out to buy some parts and me and my buddy went a little more extensive on the rear end trellis frame look...Still have one more link on each side to add...I had a close up pic but it just disappered off of my phone...
Heres a shot of the how the tail end is going so far...
Heres a shot of the how the tail end is going so far...
#8
Everything welded in on the tail section...It came out ok considering the welder that was used..
Painted everything up to match..Just rattle canned it for now this winter hopefully I can tear it back down and get things powder coated..
Engine back hanging in..
Tank and seat mocked up on it...still gotta work on the seat fitment
Painted everything up to match..Just rattle canned it for now this winter hopefully I can tear it back down and get things powder coated..
Engine back hanging in..
Tank and seat mocked up on it...still gotta work on the seat fitment
#10