A big thanks to LikitySplit for the help[&:][&:]

But I think I may need to look at the lights by the temp guage and odometer[]

[IMG]local://upfiles/4729/5D8E72DEC5344E2A97DC890A7B90E5F3.jpg[/IMG]

 

Damn that looks really good!! The bulb for my temp gauge and odometer is one bulb!! How bout you?

 

One bulb for temp and another bulb for odom for me. Today i took apart the guages again and bent the bulb tword the LCDs so it would be brighter and it worked!

 

thats cool , but one concern i have is that the blue is too dark and it might not be as clear as red, orange, or light blue.

 

So all you did was replace the stock bulbs with blue ones right?? Looks good. Just wondering if they make led bulbs that small for us and what bulb number exactly is it??

 

Nevermind, I'm a douche!!! If I would have read a couple of posts below, I wouldnt be asking these stupid questions!!!!

 

I know the bulbs for me was 3mm but it may be different for other bikes!!

 

UPDATE:Just added the new pic for the brighter guages.

There are two (if not more) diffrent types of LEDS, one were the light is consentrated through the top and another where its like a normal bulb (the light shines in all directions).The problem with my LEDs was that the light came out the top of the bulb like a beam. Therefore the light wasn`t hitting the clear thingy around the bottom of the guages, so I just bent the LEDs to the side so it was aimed at it.


[IMG]local://upfiles/4729/3BC3627B18CA4F639F42129E85C96513.jpg[/IMG]

 

My girlfriend (that I live with) hates it when i "tinker"

 

Nice...