Show Off time my 93
#1
Show Off time my 93
Hi Guys long time no post.
I think my 93 is finally done.
With mods and upgrades..
Started with 5k bone stock never been out of IL in 2004..
Now 29700 and been to MT, WY, SD,MN, WI, IN, TN, NC, KY.
Many more hopefully soon.
Ok mods were a bunch...
clip ons+bar end weights, progressive and racetech forks, exhaust headers and can, "factory pro"shifter+ carbs, k+n filter, galfer rotors (front floaters) wheel from 99 Hawk modified, polish+ paint wheels, buell pegs, leds replaced lights everywhere, gauge faces glow, pazzo levers, E3 Spark plugs new coils and custom wires, seat, new gas cap, custom paint on tank, screens on vent holes, alum cooling fan, new lwr temp switch for radiator, HIDS, temp \clock gauge install, swing arm paint and spool install, new rear turn signals and bracket.
phew!!! im tired just from writing...lol
ok let me know guys,...
I think my 93 is finally done.
With mods and upgrades..
Started with 5k bone stock never been out of IL in 2004..
Now 29700 and been to MT, WY, SD,MN, WI, IN, TN, NC, KY.
Many more hopefully soon.
Ok mods were a bunch...
clip ons+bar end weights, progressive and racetech forks, exhaust headers and can, "factory pro"shifter+ carbs, k+n filter, galfer rotors (front floaters) wheel from 99 Hawk modified, polish+ paint wheels, buell pegs, leds replaced lights everywhere, gauge faces glow, pazzo levers, E3 Spark plugs new coils and custom wires, seat, new gas cap, custom paint on tank, screens on vent holes, alum cooling fan, new lwr temp switch for radiator, HIDS, temp \clock gauge install, swing arm paint and spool install, new rear turn signals and bracket.
phew!!! im tired just from writing...lol
ok let me know guys,...
#8
#9
Some lovely mods there - looks terrific!
Two questions for you if you don't mind :-
1) Can the vent hole screens be purchased somewhere pre-cut to fit these bikes or was this entirely custom made on your part? - Got any tips if it's the latter? What material to try and look for / how to measure it up to mount firmly in there etc.
2) The modified dash board, is there a company somewhere out there that sells the whole kit? I've seen this aftermarket dash a few times now but yet to determine how/where people are obtaining it.
Thanks a bunch for your feedback.
Two questions for you if you don't mind :-
1) Can the vent hole screens be purchased somewhere pre-cut to fit these bikes or was this entirely custom made on your part? - Got any tips if it's the latter? What material to try and look for / how to measure it up to mount firmly in there etc.
2) The modified dash board, is there a company somewhere out there that sells the whole kit? I've seen this aftermarket dash a few times now but yet to determine how/where people are obtaining it.
Thanks a bunch for your feedback.
#10