When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi, I have a 2000 cbr 600 f4. Bought it from face book and started to work on wiring. There is no speedo or rpm the temp gauge dose not work either. it illuminates and dummy lights work. The key switch going to the main harness has been cut and the red and green wire at the connector have been tied together. And the green from the key left unhooked. There is not high beams only low beams. While the bike is cold it’s hard starting but starts right up after it is warmed up. I recently purchased another main harness with the front end (head light and turn signal) harness. And had switched the harnesses and no longer have spark but have high beams. Regardless of how the key wire orientation. Plug the old back in. Make the key wired how it was. And it starts right up. Any help would be great.
