weather was a warm 45 degrees today so i finally got around to having my bike inspected. I failed because i installed a new undertail and my directionals blink too fast.I know there is an install to slow them down. could anyone tell me what part i need and how to do it? Thanks guys

 

http://cgi.ebay.com/ebaymotors/Unive...spagenameZWD1V

Maybe something like this? Hope it helps

 

Bought mine from this guy. Super easy plug & play install. Make sure your model is on his list.

 

Resistors?????

 

thanks guys

 

Id spend $5 on some resistors and try that first, jmo.

 

stay away from resistors..they get very hot. get a variable load flasher relay. i got mine for $6.

 

I just put this one in a month or so ago and it worked great. It has a tab that can be trimmed down to fit in the stock location. Check the store location, they may have one in your area.
http://www.cyclegear.com/spgm.cfm?L1...tem=MRX_FRU1_G

 

D2VW14_20, no disrespect but resistors get way to hot and can melt thing that you don't want melted if not careful with placement.

 

thanks camaropower bought that flasher relay from ebay and it plugs right into where the old relay goes. works great and was super easy to install.