Hey Guys New Here May Sound Like A Silly Question But Were Is The Hazard Switch On A 1999 Cbr 900rr Not Like The Relay But The Actual Button?

 

good posibility it doesnt have one.

 

Im Trying To Figure Out Why Everytime I Turn On On The Turn Signals The Flashers Come On???

 

I would start with the controls on the handlebar. Take the screws out of the plastic case and see if anything is crossed inside. Did you just buy the bike or did you modify something recently?

 

doesnt have hazards lights. Sound like sumtin is shorted sum place.

 

possible that aftermarket signals were installed, improperly.

 

as always... start with the last thing you modified!

 

on my f4 i just got there was a loose wire where the prej owner had hooked up the integ led taillight - the left flashed all the time and the right never.
i followed the colours, wiggled and found an uncovered loose splice
stuck a wirenut overit and alls well.
so what im trying to say is just follow your wires...colour coded.

 

I agree. Usualy pretty easy to tell when someone has altered the factory wires. Good Luck!

 

Thanks Guys Got The Bike This Past Summer Someone Put Newer 600rr Blinkers On It So Im Guesiing Im Lookin For A Wire Issue Like You Guys Said Thanks.